[ < Back | Next > ]
[ Page: 1 ] |
Sort by: [ Title | Date | Author ] |
|
 |
Yamaha Receiver RX-V992 For: URC MX-3000 By: Ryan Berg | Part of a complete system RCC file. |
|
|
Yamaha Receiver RX-V2700 For: URC MX-6000 By: Richard Blake | Part of a complete system CCP file. |
|
|
For: URC MX-6000 By: Richard Blake | MX-6000: Real World Sample My CCP file for MX-6000, MSC-400 and PSX-1. It is very much a work in progress, as have yet to move the required macros and controls to the MSC-400 (there are a couple, but far from complete). Will provide updates when complete. If you have any comments/feedback or questions, please feel free to drop me a line through RC Mail or email. |
|
|
Yamaha Receiver RX-V592 For: URC MX-3000 By: Greg Francis | Part of a complete system RCC file. |
|
|
 
For: URC MX-3000 By: Greg Francis | Home Automation with an MX-3000 I've been a computer programmer for longer than I care to admit. It took some time to get used to the development environment for the MX-3000, but this forum helped a LOT. I'm finally posting my RCC file that controls all electronics and lights in my house, inside and out. Many of my controls for the various devices I borrowed from various posts here. I even took some digital pics my rooms and of some of my remotes to put them in the remote either as backgrounds or to use for buttons. I also tried to standardize the layout somewhat, almost every screen has a return arrow in the lower left to go to the previous screen, each room has a lights button in the middle of the bottom edge, each room has a power on/off button in the lower right, each lights screen has an All Off button. I used a lot of variables to determine which devices were on, and each light has its own variable so when it is off the slider is red and to the left, when it is on it is green and to the right. I use X-10 modules for the holiday lights and then hide those buttons during the off season. I even have a Packer G icon on the main page which brings up the schedule with buttons on each game to switch to the proper... (more) |
|
|
Yamaha Receiver RX-V563 For: URC MX-3000 By: Dean Kline | Part of a complete system RCC file. |
|
|
 
For: URC MX-3000 By: Dean Kline | Dean Kline's New MX-3000 I have taken some great work by others, and added a litte flair. I tweeked the grahics a bit, and added some of my own. I focused on the biggest problem with this remote, the space issues. This forced all the grahics to be too small to be practical. I fixed this problem, and was still able to add jump buttons on the top of all pages. Run the emulator to really see the potential of this layout. |
|
|
Yamaha Receiver RX-V592 For: URC MX-3000 By: Caryl Lange | Part of a complete system RCC file. |
|
|
 
For: URC MX-3000 By: Caryl Lange | Caryl Lange's Basic Setup Pretty basic setup with some nice macros, timers and a photo with buttons for the lights. |
|
|
| Return to the index of all files. |
