|
 |
|
|
 
For: HTM MX-1000 By: Abdul Jalib | Abdul Jalib's Seascape Configuration (MDL) This is my conceptual prototype for an MX-1000 layout with a sea motif. Your buttons are fish, crabs, lobsters, shells, and black pearls (plus a "water surface" button.) No functions are attached to the buttons, since I don't actually own an MX-1000. Includes .BTN and .BMP files plus the button.ini file. See the readme.txt file for installation instructions. I've set up the interface for two devices. In older MDL format. |
|
|
 
For: HTM MX-1000 By: Ben Adler | Ben Adler's Home Theater If you are setting up a new MX1000 and you have been reading this website you'll know that it can be time consuming to set it up. If any of your equipment matches mine, starting with this will save you hours of setup time! |
|
|
 
For: HTM MX-1000 By: Bill Evans | Bill Evans MX File I'm doing this only because Gregorius pleaded with MX-1000 users! My setup may be uncommon to most of you. I use an HTPC (Home Theatre PC) as the base for my system. |
|
|
 
For: HTM MX-1000 By: Brett Robichaud | Brett Robichaud's System Setup Complete system for my setup. All button design credit goes to Daniel Tonks, I did nothing creative here. |
|
|
 
For: HTM MX-1000 By: Brian Hafner | Brian Hafner's MX-1000 Remote This is my simple, yet functional layout file for the Home Theater Master MX-1000. Many of the buttons have been "borrowed" from Daniel's Configuration with a few custom ones. In most cases, I used the "PREV CH" hard button on the remote as a "Pause" (for the ReplayTV, DVD, and CD, and MP3 players). I found this was much more useful as a hard button. |
|
|
 
For: HTM MX-1000 By: Dan Schwartz | Dan Schwartz's MX-1000 Setup (MDL) I set up my system for 6 devices. It's a much simpler button layout, but I used Daniel Tonks' buttons that are available here (thus you'll also need to download and install the button.ini and BTN files from his configuration). Every Command has been learned, and I have included the .LDT file. |
|
|
 
For: HTM MX-1000 By: Dustin | Dustin's MX-1000 .MX File Here is my setup for the MX-1000. Many of the buttons were "borrowed" from this forum. My goal was to make it simple. I did not use a main1 page. I just modified the main, added some channel macros, and lighting control. Then took out everything else. |
|
|
 
For: HTM MX-1000 By: Ian Schatz | Ian Schatz's MX-1000 File A "single touch" layout. Each of the main page buttons uses discrete codes to manage power, input, initial volume, and surround modes for the source selected. There are a few new buttons in my "more buttons" layer, but I must thank all you other contributors for most of my buttons. Even if the components don't exactly match yours, use the button layout as a template for learning your IR codes into, then do your own macros. Have fun! |
|
|
 
For: HTM MX-1000 By: IeraseU | IeraseU's Basic MX-1000 Layout This is a new, prettier, more fine-tuned version of the original file I posted. Now all 7 components have custom logos (6 borrowed from this site, 1 self-made). I also contributed 12 custom logos of my own (2 DSS logos, cartoon network, HBO, Showtime, CNBC, Vivid, Disney, ESPN, TechTV, Sci-Fi, E!). Did not edit the *Main* page, all editing was done on Main1 so all labels (on the left) are intact. Definitely worth a look for DSS users, and people interested in custom network logos. |
|
|
 
For: HTM MX-1000 By: Jason Sampson | Jason Sampson's MX-1000 Setup My system is setup for 6 Devices and makes use of discrete codes learned from a Pronto (sorry no translator...). This uses a combination of preprogrammed codes and learned commands. Some original buttons included, but relies heavily on Daniel's buttons. |
|
|
 
For: HTM MX-1000 By: John Sumner | John Sumner's .MX Configuration From the "less is more" philosophy... I tried not to clutter the remote with pages full of seldom used functions (except for DVD, page 2). The hard Power button is a macro in each device that turns all power off, so no matter what the state, it works. |
|
|
 
For: HTM MX-1000 By: Matt Steindl | Matt Steindl's .MX Setup I started by stripping everything out of the default model that I could, and tried to use a small number of buttons to conserve resource space. That way I could have room to upgrade when the Designer software gets a little better. |
|
|
 
For: HTM MX-1000 By: Quinn Dunki | Quinn Dunki's Complete Setup Here's my complete setup. Everything here is controlled flawlessly by my MX-1000 (including the Bose). |
|
|
 
For: HTM MX-1000 By: Rudy Rousseau | Rudy Rousseau's MX-1000 File My MX file aims for simple and easy use of 6 components. I used John Corkery's buttons extensively. I did not use a Main1 page. The file includes only learned codes and macros (no preprogramed codes.)It also includes the discreet input codes and power off/on codes for the Mits WS55857 I found on this forum. |
|
|
 
For: HTM MX-1000 By: Tom Saul | Tom Saul's MX File A complete system MX file. |
|
|
More results: [ < Back | Next > ]
Return to the index of all files. |
