| Post 1 made on Saturday February 6, 2010 at 15:41 |
Steve Garn Senior Member |
Joined:
Posts: | November 2003
1,319 |
|
|
Just this one problem..
Anyone have these to save a fellow installer dude?
Using MX-980's thru-out the house with the V883 Matrix and Electronic Volume Controls -
Need to get rid of the direct ir to the S86 to keep the installation clean.
Many thanks
Steve
|
Manuals?! We don't need no stinking manuals! a.. er.. |
|
| Post 2 made on Monday March 15, 2010 at 19:36 |
Hi there, Im messing with a Elan z880 at the moment and MX-980 remotes. I now this is not what you asked for but why not install a URC MSC400 controller and a control the z883 using RS232? You'll need a MSC400 starter kit also. It has the serial cable you need.
Just an idea!
|
|
| Post 3 made on Tuesday March 16, 2010 at 20:48 |
HRTdude Long Time Member |
Joined:
Posts: | August 2008
83 |
|
|
Steve check your email, I sent you part of a project that I did. I hope this helps getting you started.
Finita, I think he is using a MSC-400 and controlling both the 8.6 and v883 through rs-232. You are looking for commands for the z880, a different piece. I just looked at the manual it explains it pretty well. you first put the Carriage Return, then the unit ID, then the zone number, then the source number. Also check the dip switch settings and read that page of the manual.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
