|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | NEW Products released This thread has 31 replies. Displaying posts 1 through 15. |
|
| Post 1 made on Tuesday July 27, 2004 at 03:20 |
select Founding Member |
Joined:
Posts: | January 2002
229 |
|
|
RTI is now in the process of releasing their new products. The RP-6, T2+, and T1, along with new software. Check out their web site. http://www.rticorp.com
|
|
| Post 2 made on Wednesday July 28, 2004 at 01:28 |
RTI Installer Super Member |
Joined:
Posts: | March 2002
3,320 |
|
|
On 07/27/04 03:20, select said...
RTI is now in the process of releasing their new products. The RP-6, T2+, and T1, along with new software. Check out their web site. http://www.rticorp.comYa, but you probably wont see any product until sometime in September
|
Never Ignore the Obvious -- H. David Gray |
|
| OP | Post 3 made on Wednesday July 28, 2004 at 10:55 |
select Founding Member |
Joined:
Posts: | January 2002
229 |
|
|
I have four RP-6 receivers and four RM-433 modules right now. I have already started to program using 2.0. Just waiting for the T2+s.
|
|
| Post 4 made on Thursday July 29, 2004 at 04:24 |
RTI Installer Super Member |
Joined:
Posts: | March 2002
3,320 |
|
|
No one out here has seen any product yet, except for the beta stuff, further , RTI is not offering any actual delivery dates, so how did you get the parts?
|
Never Ignore the Obvious -- H. David Gray |
|
| Post 5 made on Thursday July 29, 2004 at 08:12 |
gages Founding Member |
Joined:
Posts: | March 2002
23 |
|
|
Will the T2+ work with the IRF-6?
|
|
| OP | Post 6 made on Thursday July 29, 2004 at 12:03 |
select Founding Member |
Joined:
Posts: | January 2002
229 |
|
|
Parts are available to RTI dealers. These are not beta units.
The T2+ will not work with the IRF-6, the IRF-6 is 418 Mhz and the T2+ works at 433 Mhz.
|
|
| Post 7 made on Friday July 30, 2004 at 06:45 |
gages Founding Member |
Joined:
Posts: | March 2002
23 |
|
|
Will there be some type of upgrade for the T2 and IRF6?
|
|
| OP | Post 8 made on Friday July 30, 2004 at 11:12 |
select Founding Member |
Joined:
Posts: | January 2002
229 |
|
|
I doubt it as they operate at different frequencies. It would require a hardware upgrade on the T2. Maybe they will have a RM-418.
|
|
| Post 9 made on Saturday July 31, 2004 at 21:06 |
gages Founding Member |
Joined:
Posts: | March 2002
23 |
|
|
Sorry, upgrade as in trade in the old products for new ones?
|
|
| OP | Post 10 made on Saturday July 31, 2004 at 21:29 |
select Founding Member |
Joined:
Posts: | January 2002
229 |
|
|
You have to ask RTI that one. I am sure they will still sell/repair the T2s in the future.
|
|
| Post 11 made on Sunday August 1, 2004 at 03:06 |
RTI Installer Super Member |
Joined:
Posts: | March 2002
3,320 |
|
|
I am sure RTI’s T2 repair and replace programs will remain in effect for a while, so I would not worry too much about that. The new frequency the T2+ utilizes is the same as the new Sonance remote equipment, which is also designed by RTI. It is possible to swap out the stock T2 Lynx transmitter with the 433 model {we actually tried a 900Mhz chip swap once}, but I am not sure if the communication architecture will be compatible.
Further, everyone all the way down the chain of command is still saying that no product has been delivered to any Avid distributor. So I am puzzled where the product select has came from?
|
Never Ignore the Obvious -- H. David Gray |
|
| OP | Post 12 made on Sunday August 1, 2004 at 11:41 |
select Founding Member |
Joined:
Posts: | January 2002
229 |
|
|
Would you like me to take a picture of the product, why must you continue to call me a liar? I know I am not the only one to receive product. Why is it so hard to believe that you are not the first?
In addition to changing the frequency of the T2, you must upgrade its firmware to work with the new software.
|
|
| Post 13 made on Sunday August 1, 2004 at 18:00 |
RTI Installer Super Member |
Joined:
Posts: | March 2002
3,320 |
|
|
Don’t be offended, I don’t think you’re a liar; it’s just that this puzzles everyone I have talked to, They ask me the same thing, did you buy the product direct from RTI, from an avid distributor or someone else, that’s all I am really asking you, I am just curious.
I don’t believe changing the firmware on the T2 as well as the transmitter frequency is going to allow the T2 to work with the new RF receivers, as the architecture of the T2+ is a very different animal. The programming resides partially on the RP-6 when the T2+ is used in RF mode.
|
Never Ignore the Obvious -- H. David Gray |
|
| OP | Post 14 made on Monday August 2, 2004 at 01:12 |
select Founding Member |
Joined:
Posts: | January 2002
229 |
|
|
1) AVID
2) You can create macros that reside on the RP-6 or run macros/commands directly from the T2+.
|
|
| Post 15 made on Monday August 2, 2004 at 14:15 |
markrubin Founding Member |
Joined:
Posts: | February 2002
919 |
|
|
I am very interested in obtaining the new T2+ and RF module: please contact me if/when available
Thanks
Mark Rubin
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
