Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Remote access to XP8s
This thread has 6 replies. Displaying all posts.
Post 1 made on Saturday November 16, 2013 at 08:33
freelanceav
Junior Member
Joined:
Posts:
July 2013
3
Hi guys,

Does anyone know which TCP/UDP ports we require to access a XP8s remotely using Integration Designer?

So far we've opened Ports 80, 4110, 5053, 5056, 50001, but no luck.

When contacting support, they gave us 5053 and 5056, but even a local port scan does not get a reply from those ports.

If anyone has any ideas, I'd be keen to hear them.
www.freelanceav.com
UK: +44 (0) 20 8 123 8590
US: +1 (718) 312 8590
Post 2 made on Saturday November 16, 2013 at 14:08
Glackowitz
RC Moderator
Joined:
Posts:
May 2002
3,715
Did you setup port forwarding to the XP8 on the router?
The letters T and G are very close to each other on a keyboard. This recently became all too apparent to me and consequently I will never be ending a work email with the phrase "Regards" again.
OP | Post 3 made on Saturday November 16, 2013 at 17:09
freelanceav
Junior Member
Joined:
Posts:
July 2013
3
That's exactly why we're asking which ports are required.

So far we've opened Ports 80, 4110, 5053, 5056, 50001, but no luck.

RTI tech support gave us ports 5053 and 5056, which does not appear to be correct.

Now we're sunning a port scan between port 1 and 65535. Maybe we'll have an answer on the open ports after a few days, but we don't really have the time to wait that long.
www.freelanceav.com
UK: +44 (0) 20 8 123 8590
US: +1 (718) 312 8590
Post 4 made on Saturday November 16, 2013 at 22:09
PeterN
Active Member
Joined:
Posts:
July 2008
503
Check on the RTI forums (forums.rticorp.com) there are several threads about this there.

If I recall you have to forward the ports on BOTH ends that means from your router to your computer as well.

I never got that to work to the point where I could upload. I could see the remote XP8 but no dice.

I would go to a VPN or on-site PC if you need reliable remote access.
Post 5 made on Monday November 18, 2013 at 06:46
Total Control Remotes
Super Member
Joined:
Posts:
July 2006
2,984
4110 - download the RTI Panel tech note on the dealer site which details how to do this.
Post 6 made on Friday November 22, 2013 at 06:13
ralliart329
Active Member
Joined:
Posts:
October 2007
655
ok you need to do 5053 TCP only and 5056 UDP only... what most dont realize is this must be done on the clients router to the xp8s but ALSO YOUR ROUTER TO YOUR PC SET TO A STATIC IP... why? couldnt tell you, but seen plenty of guys discuss and successfully do this over on the dealer forum and this was needed.
Post 7 made on Sunday October 25, 2015 at 14:55
Decelerate
Long Time Member
Joined:
Posts:
January 2013
19
We have tried 5053 TCP only and 5056 UDP only to no avail. We forwarded these ports on both the local and remote routers. Local PC is set to a static IP and of course the XP-8 is set to a static IP as well.

Whenever we try to upload the program to the external IP where the XP8 is located it fails and says to trouble shoot the connection...

Any ideas?


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse