|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | Aprilaire 8870 2way This thread has 22 replies. Displaying posts 16 through 23. |
|
| OP | Post 16 made on Saturday March 6, 2010 at 18:19 |
Glackowitz RC Moderator |
Joined:
Posts: | May 2002
3,793 |
|
|
Has anyone got a working 8870 setup with 2way??
The system I installed works for setting the mode...Heat, Cool, Auto, Off, but temp feedback, Setpoints, dont work. If I press the setpoint buttons up or down I get no fb on the 8811, I set it up as a 1way with the 232 strings and can get the setpoints working fine, but now have no fb.
The denon receiver, weather fb works fine,
I have changed Ports and then redid the commands, changed addresses, changed baud stil nothing for FB
Any ideas??
Cables have tested fine, as the 1 way 232 was sending fine(as well as I have metered them)
Thanks
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
| Post 17 made on Saturday March 6, 2010 at 18:35 |
davenport Senior Member |
Joined:
Posts: | October 2006
1,361 |
|
|
On March 6, 2010 at 18:19, Glackowitz said...
Has anyone got a working 8870 setup with 2way??
The system I installed works for setting the mode...Heat, Cool, Auto, Off, but temp feedback, Setpoints, dont work. If I press the setpoint buttons up or down I get no fb on the 8811, I set it up as a 1way with the 232 strings and can get the setpoints working fine, but now have no fb.
The denon receiver, weather fb works fine,
I have changed Ports and then redid the commands, changed addresses, changed baud stil nothing for FB
Any ideas??
Cables have tested fine, as the 1 way 232 was sending fine(as well as I have metered them)
Thanks I'm working on that today/tomorrow too, I'll let you know.
|
|
| Post 18 made on Saturday March 6, 2010 at 19:03 |
select Founding Member |
Joined:
Posts: | January 2002
229 |
|
|
If you want I can look at your file, I have a 16 zone system working since last year. In fact the first version (1.0) only polled 2 zones.
|
|
| Post 19 made on Saturday March 6, 2010 at 19:30 |
Avid67 Long Time Member |
Joined:
Posts: | February 2008
118 |
|
|
I have a working 8870 file. I don't know what the best way to share the file is but let me know and I can get it to you. Perhaps PM me your email address.
|
|
| Post 20 made on Saturday March 6, 2010 at 19:35 |
Innovative A/V Select Member |
Joined:
Posts: | December 2007
1,966 |
|
|
I haven't messed with that yet...I have a 5 zone coming up shortly....let me know how it works out
|
www.goinnovativeaudiovisual.comCedia certified installer ISF Certified 'It's not how many times you get knocked down but it's how many times you get back up and go forward" |
|
| Post 21 made on Sunday March 7, 2010 at 14:02 |
nardo1 Active Member |
Joined:
Posts: | April 2005
628 |
|
|
On March 6, 2010 at 18:19, Glackowitz said...
Has anyone got a working 8870 setup with 2way??
The system I installed works for setting the mode...Heat, Cool, Auto, Off, but temp feedback, Setpoints, dont work. If I press the setpoint buttons up or down I get no fb on the 8811, I set it up as a 1way with the 232 strings and can get the setpoints working fine, but now have no fb.
The denon receiver, weather fb works fine,
I have changed Ports and then redid the commands, changed addresses, changed baud stil nothing for FB
Any ideas??
Cables have tested fine, as the 1 way 232 was sending fine(as well as I have metered them)
Thanks Sent you an email.. Let me know
|
I'll let you know tomorrow.. |
|
| Post 22 made on Monday March 8, 2010 at 09:47 |
Can I get a copy? I am about to do a single zone also. Thanks
|
keep on truckin |
|
| Post 23 made on Monday March 8, 2010 at 12:30 |
tabascojunkie Long Time Member |
Joined:
Posts: | July 2007
255 |
|
|
I believe there are several temp setpoint variables depending on the mode, auto vs. heat vs. cool, etc. I'm guessing you may be looking at one while in a differnet mode.
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
