Post 1 made on Saturday April 5, 2008 at 00:36 |
Looking for discrete ir codes for the 2nd zone speaker outs (speaker C) on a Marantz SR8001 receiver. I would use the 7001 codes but they aren't in there either. Wondering if anyone has the codes for it. I can not do RS232 since we are using an RP1 with the system right now that is controllin a cable box off of a T1 remote.
I already searched the forums and could not find anything. I know the codes are in URC but that doesn't help me out here.
Thanks for any help.
|
Pat M |
|
Post 2 made on Saturday April 5, 2008 at 10:47 |
SAAudio Advanced Member |
Joined: Posts: | March 2007 993 |
|
|
For Marantz AVR's use Marantz - Receiver - 2006 Rec/Amps for main zone and Marantz - Receiver - 2006 Rec/Amps Multi A for zone 2.
|
|
OP | Post 3 made on Saturday April 5, 2008 at 12:35 |
Thanks SAAudio for the info. That was what I was using and it was turning on MA. I need it turn turn on MSA instead. I ended up using the SR7400 multi to turn it on and off. Now just trying to get the source selection to work for MSA and not MA.
Thanks for the info though. Might just have to get an RP6 to do what I want it to do but this is just a temp config until the complete Crestron system is up and running.
|
Pat M |
|
Post 4 made on Saturday April 5, 2008 at 12:42 |
idodishez Select Member |
Joined: Posts: | May 2003 2,433 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.