Your Universal Remote Control Center
Audio, Receivers & Speakers Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Elite Television
This thread has 7 replies. Displaying all posts.
Post 1 made on Thursday June 17, 1999 at 08:13
Steve K
Historic Forum Post
Does anyone know what the bandwidth (frequency range) of the Elite remote control is? I have a Elite Pro-1009W 1997 model and I am trying to have my universal remote learn the codes but it will not work. I think the bandwidth for this remote is too high for my RC2000MkII.
Any help would be appreciated.
OP | Post 2 made on Thursday June 17, 1999 at 11:59
Historic Forum Post
the frequency is 1.25 GHZ
OP | Post 3 made on Thursday June 17, 1999 at 15:37
Daniel Tonks
Historic Forum Post
It was my understanding that ~1997 Elite equipment used 1.4MHz, while the RC2000 will go up to 1.25MHz... and I thought this was answered in your post to the Remote Control forum.
OP | Post 4 made on Monday July 26, 1999 at 14:35
Walt Thompson
Historic Forum Post
Hi Steve;

I was able to program my RC2000MkII to control my 1997 PRO-99.

OP | Post 5 made on Monday July 26, 1999 at 15:51
Daniel Tonks
Historic Forum Post
Turns out Pioneer uses 1.125MHz; the RC2000 can go up to around that.
OP | Post 6 made on Monday August 2, 1999 at 18:17
Gary Dickey
Historic Forum Post
I have an Elite Pro 118 60 RPTV, and the original Marantz 2000 would not accept the codes. however I bought the Mark II, and that did accept the codes. The TV model prior to that, I don't know the number, worked with the first Marantz and also controlled my Elite Pro 118.
OP | Post 7 made on Monday August 2, 1999 at 23:14
Daniel Tonks
Historic Forum Post
It seems to be mostly 1997 models or thereabouts that include the "out of range" IR codes.
OP | Post 8 made on Saturday August 7, 1999 at 17:25
Historic Forum Post
Good News, the 1009 has TWO IR eyes, one for the GUI higher freq system Pioneer had as well as the normal freq. range ir eye. The workaround is to get the remote from a pro100/200/700HD. The 1009 should accept all the codes from these units, including the auto/full/cinema/zoom adjustments needed for the 16:9 size. Good luck.

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse