Your Universal Remote Control Center
RemoteCentral.com
Sony Remote Controls Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 1 of 2
Topic:
SOny RM-V302
This thread has 26 replies. Displaying posts 1 through 15.
Post 1 made on Sunday October 19, 2003 at 17:52
Taxe29
Lurking Member
Joined:
Posts:
October 2003
1
I lost my instruction for programming it. Can anyone help?
Post 2 made on Sunday October 19, 2003 at 17:57
Ron Aronson
Super Member
Joined:
Posts:
June 2002
3,966
I sent you a pdf file by email
Post 3 made on Monday October 27, 2003 at 09:31
Albys
Lurking Member
Joined:
Posts:
October 2003
3
I've the same problem (missing instruction manual) for my RM-P302 (with a P instead of a V ... I wonder what's the difference). Can anyone help me?
Post 4 made on Monday October 27, 2003 at 09:47
Ron Aronson
Super Member
Joined:
Posts:
June 2002
3,966
The RM-V302 is a universal remote, while the RM-P302 is a remote for a specific component. If you furnish the EXACT component model number I may be able to help.
Post 5 made on Monday October 27, 2003 at 10:19
Albys
Lurking Member
Joined:
Posts:
October 2003
3
My RM-P302 came toghether with a Sony Dolby Surround A/V Amplifier (model TA-AV501R) ... does this help?
Thanks a lot!
Post 6 made on Monday October 27, 2003 at 12:05
freeskier
Lurking Member
Joined:
Posts:
October 2003
1
On 10/19/03 17:57, Ron Aronson said...
I sent you a pdf file by email

Can you send me that PDF? I have lost my instructions as well for the RM V302. Thanks.
Post 7 made on Monday October 27, 2003 at 12:44
Ron Aronson
Super Member
Joined:
Posts:
June 2002
3,966
freeskier-on it's way
Post 8 made on Monday October 27, 2003 at 12:56
Ron Aronson
Super Member
Joined:
Posts:
June 2002
3,966
Albys-I couldn't find anything on your remote, but here is a link to Sony's email [Link: products.sel.sony.com]
Post 9 made on Tuesday October 28, 2003 at 04:02
Albys
Lurking Member
Joined:
Posts:
October 2003
3
Thanks again Ron ... I'll send them an inquiry as soon as I go home. Ciao!
Post 10 made on Wednesday October 29, 2003 at 11:06
Ron Aronson
Super Member
Joined:
Posts:
June 2002
3,966
I am going to make a new thread with this, but I put it here first to test it before I opened a new thread.

Here is a great link I just got from Sony, which provides manuals and codes for many of the more popular remotes. Should save a few postings, and if someone misses it we can refer them to it easily. [Link: iq.sony.com]

EDITED NOTE:
The information in the above link is no longer available. Sony, in its infinite wisdom, decided to remove this information from their site.

If you need a manual, codes, or both, go here and see if your remote is listed [Link: remotecentral.com]

If it is not listed,start a new thread, and make the subject “Need manual or codes for (Give full remote model here)


This message was edited by Ron Aronson on 06/11/04 08:35.
Post 11 made on Thursday November 20, 2003 at 13:21
brenden
Lurking Member
Joined:
Posts:
November 2003
1
I just wanted to point out my experience with my RM-V302
I quickly programmed everything, except my Hughes DSS receiver. It seemed as though no code worked on the DSS button. (even cycling through the codes)
I eventually read in the manual about how the DSS / DVD / RCVR buttons could be assigned to other components. I then changed the DSS button to (gasp) DSS, then in code discovery, I was able to finally control my DirectTv receiver! Moral of the story, do not assume the 3 selection buttons will automatically control what the button stands for.
Post 12 made on Tuesday May 25, 2004 at 20:40
DrLate
Lurking Member
Joined:
Posts:
May 2004
4
I've just got an SA-2000 and can't get any codes to work. Have tried the Sony designated code (014), have made sure a digital STB is specified, have reset the whole remote, all to no avail... Oh yes, and have tried the search function. I've gone through these repeatedly. Anyone out there have any suggestions?
Post 13 made on Wednesday May 26, 2004 at 03:00
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
27,829
You're really, really, really are sure the button has been configured to control cable boxes and not something else?

If so, and it still doesn't work, the remote may not have a code for that particular box.
Post 14 made on Wednesday May 26, 2004 at 03:10
edmund
Elite Member
Joined:
Posts:
April 2002
13,098
On the sony vl700, the digital cable box codes were under SAT,and as the V302 has the CBL/SAT key set to cable from the factory, you would need to switch it to SAT.
Post 15 made on Wednesday May 26, 2004 at 03:25
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
27,829
You're right, digital cable boxes are mixed in with DSS/DVR. Frankly, since they only had a couple analog cable code numbers to start with, I don't know why they couldn't have put them there...
Page 1 of 2


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse