Your Universal Remote Control Center
RemoteCentral.com
HDTV Reception Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 7 of 7
Topic:
Direct TV remote won't operate Yamaha AV Receiver
This thread has 96 replies. Displaying posts 91 through 97.
Post 91 made on Thursday April 28, 2016 at 08:31
BSample
Junior Member
Joined:
Posts:
April 2016
1
Need help: I have Directv genie remote RC66RX & trying to program it to operate my Yamaha RXV379 A/V unit in the AV2 slot of my Directv remote.

Several of the codes listed on DTV site: 30176, 31276, & etc... allow me to control volume (up, down, mute) & a few allow me to control volume & turn off the Yamaha A/V unit, but not turn it back on. I have to use the Yamaha remote to turn unit on.
I know this thread is old, but has anyone found the code(s) or setup process that will allow on/off and volume control using the DTV remote. A forthcoming Blue Ray/DVD player will use AV1 slot on DTV remote, so I prefer not to use that slot just for on/off capability.
Post 92 made on Thursday April 28, 2016 at 18:03
OBICO
Active Member
Joined:
Posts:
April 2014
650
Have you called their 1-800-531-5000 number?

Please note: We cannot guarantee programming compatibility for all makes and models of equipment.

[Link: support.directv.com]
Post 93 made on Thursday April 28, 2016 at 21:16
edmund
Elite Member
Joined:
Posts:
April 2002
13,471
You WILL NOT find a single code that does both ON & OFF for Yamaha in ANY Directv remote. Sorry. Onkyo & HK owners are in the same boat.
Post 94 made on Sunday January 1, 2017 at 13:08
Kanraku
Junior Member
Joined:
Posts:
January 2017
1
As a possible help to others, I just got directv service and purchased an RC66RX remote to replace the horrible RC73 that came with the system. I was able to program the remote to turn off my Yamaha RX-A840 receiver and control the audio, but was having trouble with turning on the receiver with the remote.

After a little research and trial and error, I found code 32467, which turns my receiver on and off and also controls the volume on the receiver. I don't know if this will work for other receivers, but it does for the RX-840. Hopefully this helps someone else!
Post 95 made on Sunday January 1, 2017 at 13:26
the-one
Junior Member
Joined:
Posts:
February 2016
25
xxxxxxxxxxxx.
Post 96 made on Friday March 3, 2017 at 14:52
Roykm
Junior Member
Joined:
Posts:
March 2017
1
Hello,

I have connected my RC65 remote to my Yamaha natural sound about receiver HTR-5930 on av2 and can control the menu by using the arrow buttons, but the volume control still doesn't work for the Yamaha. Any advice?

Thanks!
Post 97 made on Friday March 3, 2017 at 15:27
edmund
Elite Member
Joined:
Posts:
April 2002
13,471
Do you have tv code programmed to the tv device on the directv remote? The volume keys won't work at all without one. Once there's a tv code, and a partially working Yamaha code programmed to av1 or av2 device, to get the volume:

1. av1 or av2
2. press and hold MUTE & SELECT for two blinks, release
3. enter 9 9 3
4. press SELECT
Find in this thread:
Page 7 of 7


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse