|
|
|
Philips Pronto Classic Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Converting .irs file to 0000 ccf hex
| |
|
Topic: | Converting .irs file to 0000 ccf hex This thread has 6 replies. Displaying all posts. |
|
Post 1 made on Wednesday March 17, 2004 at 08:32 |
npaisnel Founding Member |
Joined: Posts: | March 2002 244 |
|
|
Any one used VITO oscilloscope? and know of a utility to convert its saved file output type .irs to a ccf hex code?
Have tried Vert.exe IR converter program, but it does not support the irs file format
Neil
|
|
Post 2 made on Wednesday March 17, 2004 at 10:43 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
You may want to post this question to John Fine in the Discrete Hunter Forum.
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Post 3 made on Wednesday March 17, 2004 at 12:02 |
johnsfine IR Expert |
Joined: Posts: | September 2002 5,159 |
|
|
I read this forum too, and I never heard of .irs files before.
|
|
Post 4 made on Wednesday March 17, 2004 at 18:48 |
jarmstrong Founding Member |
Joined: Posts: | March 2002 1,780 |
|
|
Neil,
Let's try solving the problem a different way. What type of equipment are you trying to decode? What command are you looking for? There are a several IR libraries out there and one of us will usually know how to convert/decode what is out there.
-Jon
|
|
OP | Post 5 made on Friday March 19, 2004 at 06:46 |
npaisnel Founding Member |
Joined: Posts: | March 2002 244 |
|
|
Jon, I am not working on any particular bit of kit at the moment. I have the oscilloscope prog running on an iPAQ 5450, and was hoping to be able to learn and convert codes to ccf using this prog.
Using a PDA and different Pronto 'emulator' type software, Total Remote, NetRemote, PDAWin TVR etc, the learning of codes in these programs can sometimes be erratic, while the learning ability of the VITO Oscilloscope program is very reliable.
For some of those akward codes that TVR, TR, NR etc can't learn or learn incorrectly, VITO scope works great, learning and replaying the codes, perfectly, the IR engine in the software is far better. If I could get these codes that it saves in .irs format to a ccf hex, many problems solved.
|
|
Post 6 made on Friday March 19, 2004 at 08:02 |
johnsfine IR Expert |
Joined: Posts: | September 2002 5,159 |
|
|
If the .irs format is fairly simple, I probably can figure out how to decode it. If you want me to try, email .irs files for a few signals each of a few different devices (and tell me what the devices are). I've figured out a few different formats in which IR signals are stored just be looking at the raw data and spotting the pattern of an IR signal.
|
|
OP | Post 7 made on Sunday March 21, 2004 at 04:19 |
npaisnel Founding Member |
Joined: Posts: | March 2002 244 |
|
|
OK, thanks John
I have sent you an email with irs files and ccf from the same device
Neil
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|