I have to program a direct function to select the HDMI1 and HDMI2 inputs for the Samsung LN52A650 LCD TV.

The T2051 Device code I'm using does not have this function.
The Original remote code does not have this as a direct one key press, thus it is impossible to learn.

It also looks like that using a sequence of up/down selections will not work because you can't be sure of the starting point when you enter the menu on the TV set.

Only solution I see is to enter directly the HEX code.
Unfortunately I did not find those hex codes.

Would someone please point me to the HEX codes for this TV set?

Thanks,

Hilário

 [Link: remotecentral.com]

HDMI 1
0000 006D 0000 0022 00AC 00AC 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0689

HDMI 2
0000 006D 0000 0022 00AC 00AC 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0689

They do exist in T2051!

Use the "Advanced Keys" button.

D.

First of All, Thanks very much to both of you for your kind and helpful answers.

I tried both solutions and both worked.

In my computer, the "Advanced Keys" windows opens blank and stays blank for five seconds or more, that was more than enough time for me to close the window whitout realizing that it would soon be populated with useful information. If it was not for sydinstaller forcing me to pay more attention I would never see it. Thanks.

I also have found some information in the link bellow
[Link: www.remotecentral.com/cgi-bin/mboard/prontopro/thread.cgi ]

The interesting thing is that there are some diferences in the Hex codes provided, but al three solutions worked absolutely the same.

Thanks once more

Hilário