Post 1 made on Wednesday August 7, 2002 at 20:13 |
tommorrell Lurking Member |
Joined: Posts: | August 2002 3 |
|
|
Hi everyone
I hope someone can help me with this. I have been trying to put IR codes on some channel bitmaps. My cable company has three digit channels so i need to add three diffrent IR codes but everytime I add another code it changes all the IR codes to the same Example I set three codes to get channel 257 and I get three codes all set for channel 777. I use a phillps TiVo pvr to change channels so my neo sends the code to my TiVo and my TiVo changes my cable box. But the problem is in neo edit I'm sure because I can see that it changes the code I had just entered. any help would be great
thanks tom
|
|
Post 2 made on Wednesday August 7, 2002 at 20:16 |
allamand Founding Member |
Joined: Posts: | October 2001 513 |
|
|
Search the forum, this has been answered twice atleast ...
PS. There can be only one IR code PER button, use LINKS
-steve
|
-steve |
|
OP | Post 3 made on Wednesday August 7, 2002 at 20:24 |
tommorrell Lurking Member |
Joined: Posts: | August 2002 3 |
|
|
Thanks steve WOW an answer in three min. THATS FAST
|
|
Post 4 made on Friday August 9, 2002 at 09:58 |
tkrug Long Time Member |
Joined: Posts: | July 2002 435 |
|
|
yes, as steve said you can't add more than one IR code to a button. Use links.
One piece of advice...put a delay between each number. Its a pain in the rear but without the delays my cable box would often miss digits. Its easy to add the delays from the beginning than to go back...trust me!
|
-Tim Pronto Neo FAQ: [Link: remotecentral.com] |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.