| Post 1 made on Sunday June 30, 2002 at 14:06 |
My remote is hanging and is completely unresposive with the message "touch the top left corner."
Cannot re-apply the firmware either.
Any advice?
|
|
| Post 2 made on Tuesday July 2, 2002 at 08:22 |
Try removing the battery cover and look for the small
hole above the batteries. That is the reset button
that you should press with a paper clip or something
small. Depress the button and the Neo should beep to
let you know it has been reset.
The firmware update may have been corrupted on install,
so try calibrating again, if it hangs then reset and
reload the firmware to the unit again.
Good luck.
|
|
| OP | Post 3 made on Wednesday July 3, 2002 at 00:47 |
Thanks for the advice....
I tried resetting as suggested but that did not work. I eventually got the firmware to be reapplied by install a downlevel version that I had to hunt for. Then I upgraded to the new version and all is well.
Thanks for you help.
|
|
| Post 4 made on Wednesday October 16, 2002 at 20:48 |
importspeed Lurking Member |
Joined:
Posts: | October 2002
3 |
|
|
Where did you download the old firmware?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
