| Post 1 made on Wednesday December 29, 2004 at 20:04 |
Mailmann Lurking Member |
Joined:
Posts: | December 2004
3 |
|
|
Hi,
I'm currently unable to control my Dreambox with my Philips ProntoNeo.
Perhaps anyone have the right codes for NeoHacke or the *.ncf file.
If not, who has a good idea to get this combination running?
Many Thanks in advance
Marc
|
|
| Post 2 made on Thursday December 30, 2004 at 09:56 |
tkrug Long Time Member |
Joined:
Posts: | July 2002
435 |
|
|
There is a file in the FILES AREA that contains the codes for The Dreambox 7000 sat receiver. It will likely work for any dreambox receiver. Also, have you tried teaching the Neo with your dreambox remote? [Link: remotecentral.com]
|
-Tim Pronto Neo FAQ: [Link: remotecentral.com] |
|
| OP | Post 3 made on Thursday December 30, 2004 at 15:17 |
Mailmann Lurking Member |
Joined:
Posts: | December 2004
3 |
|
|
Yes,
I've tried the ncf-file that it is based on the EMEA Neo 930, but my model is the US Version TSU 500. So I made a copy of the Dreambox pages...and have inserted them in my config.
Not all keys are working specially the Channel Down and Exit Key for all menu's make trouble...
Regards
Marc
|
|
| Post 4 made on Sunday January 2, 2005 at 17:45 |
tkrug Long Time Member |
Joined:
Posts: | July 2002
435 |
|
|
I believe that NeoEdit will alow you to save a NCF as either a 930 version or 500 version. Try opening the 930 version and then saving it as a 500 version.
|
-Tim Pronto Neo FAQ: [Link: remotecentral.com] |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
