Post 1 made on Saturday January 11, 2003 at 16:01 |
Bryan Kujala Founding Member |
Joined: Posts: | September 2001 28 |
|
|
If anyone can convert and repost CCF Format know someone who can convert these codes to pronto format for us These are for the Sharp 30" LCD. The codes are as follows system date expansion judgement hex code c1 - c5 c6 - c11 c12, c13 c14,c15 Input 1 10000 010011 00 10 01 132 Input 2 10000 110011 00 10 01 133 Input 3 10000 001011 00 10 01 134 Input 4 10000 110010 11 10 01 1d3 The above are 15 bit input codes The Sharp 48 bit Remote Control System for the TV is as follows: Header Code = 0101 0101 0101 1010 1111 0001 0000 1000 + control code + data code = 1000 Where a control code example is: Power control code = 1000 0000 parity = 1001 hex =809 I know this may not make any sense to you but if you know someone who might understand this and be able to make Pronto codes that would be great.
|
|
Post 2 made on Saturday January 11, 2003 at 18:59 |
jarmstrong Founding Member |
Joined: Posts: | March 2002 1,780 |
|
|
Bryan,
Please scan and email the entire document and I can probably decode it. I think there are some pieces missing.
-Jon
|
|
Post 3 made on Monday January 13, 2003 at 03:09 |
haav Founding Member |
Joined: Posts: | August 2001 170 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.