 |
 |
|
|
Discrete Code Hunter Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | IR for hdmi input BD and input DVD of the Pioneer AV VSX-820 This thread has 29 replies. Displaying posts 16 through 30. |
|
| Post 16 made on Tuesday October 19, 2010 at 23:48 |
joshmwilliams Lurking Member |
Joined:
Posts: | November 2009
7 |
|
|
Just tried all five of the codes you provided. None of them seem to work. Thank you for the help.
|
|
| Post 17 made on Tuesday February 22, 2011 at 11:52 |
ermax Long Time Member |
Joined:
Posts: | August 2006
18 |
|
|
I also have this receiver and I am not having any luck. I have an MX-850 and tried all the code Pioneer supplied in this doc: [Link: pioneerelectronics.com]None of them work. I also tried learning from the original remove via my MX-850 and that also isn't working. I also have a USBUIRT that I used to learn codes and the codes it learns match the codes in Pioneers but when I send these codes via the USBUIRT they don't work. I just don't get it. I have never had a problem like this.
|
|
| Post 18 made on Tuesday February 22, 2011 at 13:44 |
makitamark Advanced Member |
Joined:
Posts: | April 2004
984 |
|
|
These Pioneer codes are 'two part' codes, maybe your learning device is struggling to pick up the second part, thinking it has already correctly id'd the first part??
There are also 4 remote 'modes' with differing codes for each 'mode' for the same function.
when I figure out how to 'make' these 'two part' codes I will post them for you to try.
regards Mark
|
|
| Post 19 made on Tuesday February 22, 2011 at 14:14 |
ermax Long Time Member |
Joined:
Posts: | August 2006
18 |
|
|
I noticed some of them are two part codes but not all of them are. Vol+ for example is a single code and even that isn't working. Or am I not understanding the problem correctly?
Thanks for your assistance!
|
|
| Post 20 made on Wednesday February 23, 2011 at 15:25 |
NSP01 Advanced Member |
Joined:
Posts: | March 2005
834 |
|
|
I recently realized that the 520, 820. and 920 had a tighter IR "tolerance" than all other and previous models. Why that changed I can't say. The timing gap is different so I will be creating new codes for the PioneerCustom.com site for those models (and all others as they work them as well).
Tell me again what you need and I will post them here unless you want all 200 or so dicrete commands. If you want all you'll have to wait till I repost the file at PioneerCustom.
John
|
They call me the "Thread Killer". Just watch! |
|
| Post 21 made on Thursday February 24, 2011 at 12:42 |
ermax Long Time Member |
Joined:
Posts: | August 2006
18 |
|
|
The main things I need are:
Power On
Power Off
DVD
DVR
iPod
Vol+
Vol-
Mute
This is my first Pioneer so I am not sure how to make a macro to do Power On then DVD. I notice that when I use the original remote I can't hit Power Toggle then DVD back to back. I have to wait for it to turn on before it will see the DVD command. Is there a direct DVD command that will automatically turn the receiver on if it is off? If so, those are the commands I would want. I noticed some commands in the XLS file named "Auto Function DVD" for example. I am guessing that is the command I need.
Thanks John for the help!
|
|
| Post 22 made on Thursday February 24, 2011 at 15:13 |
joshmwilliams Lurking Member |
Joined:
Posts: | November 2009
7 |
|
|
I would definitely be interested in getting the complete set of discretes. When you post at PioneerCustom, would you mind adding a link on this thread?
Thanks!!
|
|
| Post 23 made on Monday March 21, 2011 at 16:09 |
NSP01 Advanced Member |
Joined:
Posts: | March 2005
834 |
|
|
I finally finished the fixing all of the IR codes in the master list and sent them to joshmwiliams and ermax.
If anyone else needs them let me know.
I'll have them posted at PioneerCustom.com next week. Due to a server transition I can't post until then.
John
|
They call me the "Thread Killer". Just watch! |
|
| Post 24 made on Tuesday March 22, 2011 at 09:48 |
ermax Long Time Member |
Joined:
Posts: | August 2006
18 |
|
|
Where did you send them? I didn't receive anything?
|
|
| Post 25 made on Tuesday March 22, 2011 at 10:48 |
NSP01 Advanced Member |
Joined:
Posts: | March 2005
834 |
|
|
Sent to erma18@...
Guess that wasn't you - oops.
Now check your GEEmail.
|
They call me the "Thread Killer". Just watch! |
|
| Post 26 made on Tuesday March 22, 2011 at 10:59 |
ermax Long Time Member |
Joined:
Posts: | August 2006
18 |
|
|
I never check that account. I just changed my profile to an account I do use. I got your second email. Thanks for your time on this!
|
|
| Post 27 made on Friday May 6, 2011 at 21:11 |
joshmwilliams Lurking Member |
Joined:
Posts: | November 2009
7 |
|
|
They work great! Thanks John.
|
|
| Post 28 made on Saturday November 17, 2012 at 08:49 |
alejo Lurking Member |
Joined:
Posts: | December 2005
5 |
|
|
Hi Guys,
I am having the same problem now. I don't seem to be able to get the codes from learning and would appreciate it if someone can point me to the right direction. The 2010_AVR... from pioneer does not work either.
thnx
Chris
|
|
| Post 29 made on Saturday November 17, 2012 at 08:51 |
alejo Lurking Member |
Joined:
Posts: | December 2005
5 |
|
|
Hi,
I forgot to say that I have the european version of VSX-820-K.
thnx
Chris
|
|
| Post 30 made on Saturday November 17, 2012 at 19:38 |
NSP01 Advanced Member |
Joined:
Posts: | March 2005
834 |
|
|
Try the hex codes list at pioneercustom.com
If the 820 codes don't work try the 821 codes.
What remote are you programming anyway?
|
They call me the "Thread Killer". Just watch! |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
