Post 1 made on Monday January 10, 2005 at 12:50 |
I'm having a big problem with the fit and finish of the DMC1-CD front cover. Tech support is no help at all. I can't see how the front cover is supposed to lock in securely.
Anyone have any experience with this model?
Thanks
|
|
Post 2 made on Tuesday January 11, 2005 at 15:51 |
SMiller Lurking Member |
Joined: Posts: | January 2005 1 |
|
|
Ed, The combination wall housing dmc1hc is designed to be installed in a standard 2 x 4 wall. After speaking with you and learning that your install was in a 2 x 6 wall this is definitely the problem. This 2 x 6 application is creating too large of a gap between the dmc1hc wall housing and the dmc1f combination frame. This is what is putting pressure on the front cover of the dmc1cd preventing it to properly snap into place. Adjusting the depth of the wall housing will resolve this problem.
I will be sending you a new front cover for the dmc1cd since the tree receptacles on yours are worn from constantly having to adjust it.
If you run in to any further problems please feel free to contact me.
Thank you for using M&S Systems products, S. Miller
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.