|
|
|
Custom Installers' Lounge Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Doorbird or Ring? This thread has 21 replies. Displaying posts 16 through 22. |
|
Post 16 made on Saturday August 20, 2016 at 12:56 |
roddymcg Loyal Member |
Joined: Posts: | September 2003 6,796 |
|
|
I recently installed Ring standalone at a client's house. We did not try and integrate it with anything on this project. The camera is decent at its price point. The intercom works well enough.
Ironically the guys rang the doorbell at this project, I forgot I had the app on my phone and it went off while in a meeting. So I fired it up and messed with my tech for a few minutes. I could tell who he was and understand him. He could understand me, but could not recognize my voice. If it was someone I did not know it would be tough to recognize them.
|
When good enough is not good enough. |
|
Post 17 made on Monday August 22, 2016 at 17:51 |
Ernie Gilman Yes, That Ernie! |
Joined: Posts: | December 2001 30,104 |
|
|
If you have to remove a Doorbird, be cautious with the connectors on the PC Board. Those connectors pull off the board and hold to the wired connectors. The entire purpose of the connector is to have a stable simple place ON THE BOARD to connect to, so if they pull off, they're worse than worthless. Doorbird could have glued them in place!
Those connectors are not easy to get back on, but it's doable.
|
A good answer is easier with a clear question giving the make and model of everything. "The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
Post 18 made on Tuesday August 23, 2016 at 15:18 |
Synergy_tech Long Time Member |
Joined: Posts: | February 2011 36 |
|
|
According to Doorbird's API documentation, the camera will only handle one concurrent connection so being able to view it on the doorbird app and the NVR at the same time isn't possible. Not sure how to work around that one.
|
|
Post 19 made on Thursday August 25, 2016 at 21:10 |
Wozman Long Time Member |
Joined: Posts: | March 2015 69 |
|
|
The app users do not count against the limits detailed in the API doc from what I can tell. In the doc they specify that only 1 concurrent connection is allowed via the API using http request. If you scroll all the way down to the bottom, there is a section pertaining to the rtsp stream and that allows to add the channel to a NVR. I did this yesterday and once getting the stream connected, it never dropped.
|
|
Post 20 made on Sunday August 28, 2016 at 19:11 |
jasontynes Long Time Member |
|
|
On August 17, 2016 at 12:45, BlackWire Designs said...
Run a catx. I'll be releasing a solution soon that is meant for dealers and comes with real support and shipping in America and no bugs or constant driver and firmware updates needed to make it work.
It will work on iOS and Android remotely. Control4, RTI and URC to start with and is onvif complaint so it will work with most nvrs How about SIP/Rava support for us True Blue guys.... :)
|
|
Post 21 made on Monday August 29, 2016 at 16:02 |
Ernie Gilman Yes, That Ernie! |
Joined: Posts: | December 2001 30,104 |
|
|
On August 25, 2016 at 21:10, Wozman said...
The app users do not count against the limits detailed in the API doc from what I can tell. I haven't read the documentation, but I've seen the image on an iPhone and an iPad at the same time. Those were both set up using the instructions and the icon ("digital passport?"). We're looking into the admin situation, and thanks for telling us about it.
|
A good answer is easier with a clear question giving the make and model of everything. "The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
Post 22 made on Tuesday August 30, 2016 at 00:57 |
Wozman Long Time Member |
Joined: Posts: | March 2015 69 |
|
|
For the app users, just to be safe, I created one account per iOS device (2 iPhones, 1 iPad) using the admin side of the app and then logged in as a separate user on each device using their unique username/password combo (not the qr code or passport login)
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|