|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Equipment Rack Do's, Don'ts and Best Practices This thread has 36 replies. Displaying posts 31 through 37. |
|
OP | Post 31 made on Thursday January 10, 2008 at 20:31 |
ds53652 Long Time Member |
Joined: Posts: | December 2007 207 |
|
|
On January 9, 2008 at 22:36, ejfiii said...
Get two MA vertical power strips and mount one on each side inside the rack. Mount one 'upside down' ...
Oh, and re-read the MA white paper on ventilation ..... ejfiii, Thnx very much Sir.....I hadn't planned on using vertical power strips, but am now considering it. I like the idea of the shorter power cords, much cleaner. No concerns with all of the draw from the equipment coming into a single outlet (via vertical strips) on the power conditioner? In this specific job, it actually won't be that much, but I would think in the larger jobs/racks it would become a concern right? I guess you just have to calculate the consumption of all pieces and make sure the power conditioner can handle that on a per socket basis? And thnx for sharing the great pics.......wow....very, very impressive! And very helpful....thnx again!
|
|
OP | Post 32 made on Thursday January 10, 2008 at 20:45 |
ds53652 Long Time Member |
Joined: Posts: | December 2007 207 |
|
|
On January 10, 2008 at 11:58, tgrugett said...
Your question really depends on what type of rack and what the access is. If it is a fixed rack then I imagine you should just come from the top down......
That said, if you have a big ass rack or multiples, I would take efjiii's comments to heart... by those pics he seems to have his stuff down. if you are doing smaller moveable racks, here are some samples.... sorry I do not have more photos of the backs. Thnx tgrugett..... This setup is going to be two fixed (stationary) racks ganged together with the entry or dmark point being a hole punched-out in the top of the cabinet. Given this situation, you would start termination from the top and work your way down? Interesting......honestly, when I was thinking all of this through in my (newbie) mind, I figured starting at the bottom and working my way up would be best? But again.....it's a newbie mind that has NO friggin experience so I'm ALL ears... And thnx as well for sharing the pics.....VERY nice work..... Damn, you guys impress the hell out of me.....seriously.....damn! Thnx again for your help...
|
|
OP | Post 33 made on Thursday January 10, 2008 at 20:51 |
ds53652 Long Time Member |
Joined: Posts: | December 2007 207 |
|
|
On January 10, 2008 at 18:06, Vincent Delpino said...
To make them look best from the front dont buy rack mountable gear. Put everything on a custom shelf, then use the trim strip to hide the screws. Makes for a uniform rack! Thnx Vincent.....I hear you and agree 100%. Due to having to keep the cost down somewhat, I had to go with about 20% of the gear not in RShs. But I do plan on keeping the rack-mounted gear together (but separated by vent panels that match the finish of the RSHs) in the same area of the racks for aesthetic purposes. And I do plan to use the trim strips as well..... Thnx for the input Vincent! Sincerely, Roger
|
|
OP | Post 34 made on Thursday January 10, 2008 at 20:55 |
ds53652 Long Time Member |
Joined: Posts: | December 2007 207 |
|
|
On January 9, 2008 at 21:54, BNC-RCA-RG59 said...
Try putting all the amps on the bottom to so it doesn't get top heavy.
All the cable/sat boxes at the top....
....
BNC Thnx BNC, I appreciate the input!
|
|
Post 35 made on Thursday January 10, 2008 at 23:06 |
ejfiii Select Member |
Joined: Posts: | July 2003 2,021 |
|
|
On January 10, 2008 at 09:09, BNC-RCA-RG59 said...
By looking at those fine pictures, I'm going to assume you are the only guy at your firm that knows what is going on. When another one of the guys tries to do Crestron can't make it look that good, then you get to go back to finish it up all over again, right?
BNC Thanks but no. My guys are good at what they do. Its definitely a team effort on a job that big. Dawn, I will see if I can find the source tomorrow. Here are pics from a rack we are just about finished with. Check out the panduit inside to keep the main wires hidden and neat. [Link: gallery.mac.com]As for power outlets, just because you have more outlets doesn't mean you have more power. A dedicated 20 amp outlet is good for 16 amps per code. use ohms law to figure out how many watts that is and how many watts your equipment use. You may be surprised. With that said, most of my racks get 2 20 amp feeds each. I would rather have too much than too little. Oh, and I have a ton of respect for guys who can make SRSR and other pull out racks look good. We have to use them but I do it begrudgingly.
|
|
Post 36 made on Friday January 11, 2008 at 09:10 |
On January 10, 2008 at 11:58, tgrugett said...
Your question really depends on what type of rack and what the access is. If it is a fixed rack then I imagine you should just come from the top down. On January 10, 2008 at 20:45, ds53652 said...
Thnx tgrugett..... This setup is going to be two fixed (stationary) racks ganged together with the entry or dmark point being a hole punched-out in the top of the cabinet. Given this situation, you would start termination from the top and work your way down? Interesting......honestly, when I was thinking all of this through in my (newbie) mind, I figured starting at the bottom and working my way up would be best? But again.....it's a newbie mind that has NO friggin experience so I'm ALL ears...
And thnx as well for sharing the pics.....VERY nice work..... Damn, you guys impress the hell out of me.....seriously.....damn!
Thnx again for your help... I think tgrugett was referring to where to bring the wires in from top to bottom, but you were referring to where in the rack to start terminating wires, and if you come from the top up should start wiring at the bottom of the rack first, at least thats what I do
|
|
OP | Post 37 made on Friday January 11, 2008 at 09:21 |
ds53652 Long Time Member |
Joined: Posts: | December 2007 207 |
|
|
On January 11, 2008 at 09:10, AVTAS1 said...
I think tgrugett was referring to where to bring the wires in from top to bottom, but you were referring to where in the rack to start terminating wires, and if you come from the top up should start wiring at the bottom of the rack first, at least thats what I do Excellent, thnx AVTAS1!!
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|