|Post 1 made on Wednesday February 10, 2021 at 05:58|
Has anyone tried buffing out marks or scratches from the tsu9800 screen? I have a small polisher and various compounds but I'd like to know if anyone has tried and had any success before? At the moment the remote is fine and functional and I want to keep it that way. Can the facia be easily removed? Any instructions?
|Post 2 made on Wednesday February 10, 2021 at 16:01|
The fascia/touchscreen is a stick-on unit to the front panel. It is very difficult to remove unless you use a library gum removing solvent such as Un-do. I've only done this one time on a TSU9600 and have never tried a TSU9800. The whole process takes lots of patience and time. I don't recommend it. If you need parts, you might consider reaching out to user GoPronto (he is in New Zealand - find his profile on RC to get email) to see if he still has any part sources. For both the 9600 and 9800, they serviced them as a single part (front part of remote that included the silver part, the black inlay and the stick-on touchscreen as a single unit).
CAVEAT EMPTOR - With regard to polishing, you might try an automotive rubbing compound that is safe for clear-coat such as MacGuires. If what you are looking at is a crease/dent, it cannot be polished out. If what you are looking at are scuff marks, then you might have some luck. I'VE NEVER USED this on a TSU remote. I use the rubbing compound to buff out CDs that are lightly scratched.
Philips Pronto Addict/Beta Tester
|OP | Post 3 made on Saturday February 13, 2021 at 11:01 |Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.