|
|
|
The following page was printed from RemoteCentral.com:
Topic: | R232 issue dont know This thread has 17 replies. Displaying posts 1 through 15. |
|
Post 1 made on Monday March 2, 2009 at 07:44 |
Franin Long Time Member |
Joined: Posts: | April 2008 195 |
|
|
I've bought another Denon Transport 2500 this one being Region B(I already have the region A working well in my pronto 9600) and for some reason I can seem to get the power on to work. All the other commands work well. I've duplicated the RS232 command page and have assigned the different output port. The Region A is RS232 is on port 3 and the New Region B is Rs232 is on port 2. Everything else works power off etc but not power on. Any help will be appreciated.Im sure im missing something.
The Hex code: 02 20 00 00 00 00 00 03 32 33 Power On
Works well with the region A player but the new one no.
Thanks in advance Frank
|
Thanks
Frank |
|
OP | Post 2 made on Monday March 2, 2009 at 12:14 |
Franin Long Time Member |
Joined: Posts: | April 2008 195 |
|
|
Would the RF9600 be the problem? Every other command works but not that one.
|
Thanks
Frank |
|
Post 3 made on Monday March 2, 2009 at 19:58 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
Might it be that the player needs a CR at the end of the command?
The Hex code: 02 20 00 00 00 00 00 03 32 33 0D - Power On
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
OP | Post 4 made on Monday March 2, 2009 at 20:40 |
Franin Long Time Member |
Joined: Posts: | April 2008 195 |
|
|
On March 2, 2009 at 19:58, Lyndel McGee said...
Might it be that the player needs a CR at the end of the command?
The Hex code: 02 20 00 00 00 00 00 03 32 33 0D - Power On My region A works fine so the coding was right but thanks but I was actually just PM'd the solution and i cannot believe I had to simply turn off the Power save option in the player itself. I've been racking my brains for 2 days and it was just something simple like this.
|
Thanks
Frank |
|
Post 5 made on Monday March 2, 2009 at 20:46 |
RemoteQuest Long Time Member |
Joined: Posts: | October 2008 245 |
|
|
Hehee - Been there, done that! It is always the simplest solution!
Dave RemoteQuest.com
|
|
OP | Post 6 made on Monday March 2, 2009 at 22:16 |
Franin Long Time Member |
Joined: Posts: | April 2008 195 |
|
|
On March 2, 2009 at 20:46, RemoteQuest said...
Hehee - Been there, done that! It is always the simplest solution!
Dave RemoteQuest.com im certainly not an expert and I guess if I wasn't PMd the soloution i would of never guessed it. Im still amazed that turning off a power save function in the player fixes the problem. what I would like to know is how people know this, apart from the obvious been told by other memebers would you say that denon was originally contacted first with the problem? Cheers Frank
|
Thanks
Frank |
|
Post 7 made on Tuesday March 3, 2009 at 13:21 |
It is written down in the RS232 code description / manual, which you can download from the official Denon website. It took me a few looks, before I saw the little letters in the description :)
|
|
Post 8 made on Tuesday March 3, 2009 at 15:05 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
And, sometimes, there's actually a settings/setup menu that is described in the manual. In this case, though, it is in the RS232 protocol document itself. However with Denon's Japanese to English translation, things can definitely lose meaning.
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
OP | Post 9 made on Wednesday March 4, 2009 at 04:45 |
Franin Long Time Member |
Joined: Posts: | April 2008 195 |
|
|
Have to admit I missed it. but thanks again guys.
|
Thanks
Frank |
|
OP | Post 10 made on Wednesday March 4, 2009 at 04:52 |
Franin Long Time Member |
Joined: Posts: | April 2008 195 |
|
|
On March 3, 2009 at 13:21, wilbert said...
It is written down in the RS232 code description / manual, which you can download from the official Denon website. It took me a few looks, before I saw the little letters in the description :) File Sent:)
|
Thanks
Frank |
|
Post 11 made on Wednesday March 4, 2009 at 13:15 |
Kevin Magee Long Time Member |
Joined: Posts: | November 2006 135 |
|
|
I have the Denon 2500 in my file for RS232 control. I have direct track access to the first 20 tracks and a few other things not listed in the control document. The player will respond to the RS232 codes for the DVD-3930 if you add 00 to the string. For example with the Denon DVD-3930 the string for track 7 is 02 4C 32 30 30 37 03 31 38. For the BTCI 2500 its' 02 4C 32 00 30 30 37 03 31 38. I found the command for the DVD-3930 on this site and just figured where to add the zeros. I had to work out the codes for Zoom, Pure Direct, Audio, Dimmer, and a few others that were not listed.
|
|
Post 12 made on Monday March 9, 2009 at 13:12 |
I had a few problems with some functions for the 2500. Almost 90% was working, the other 10% wouldn`t. Finally I did a complete reset (again) and now everything is working perfect. For the people interested: on the web site from Marantz usa, there is an excel sheet for the BD8002 blu-ray player, which happens to use the same rs232 control codes as the Denon 2500 and 3800. This document is much more clearer on the exact codes, compared to the Denon rs232 description, so you dont have to work it out yourself.
|
|
OP | Post 13 made on Monday March 9, 2009 at 23:49 |
Franin Long Time Member |
Joined: Posts: | April 2008 195 |
|
|
Wilbert how did you go with the Pronto file I sent you?
|
Thanks
Frank |
|
Post 14 made on Tuesday March 10, 2009 at 02:20 |
It was great Franin. Unfortunately the problem wasn`t the code, but I needed to do a complete hard reset. Happily now everything is working as it should be. Thanks! B.t.w.: I`ve sent you my file, maybe it can be usefull.
|
|
OP | Post 15 made on Tuesday March 10, 2009 at 04:17 |
Franin Long Time Member |
Joined: Posts: | April 2008 195 |
|
|
On March 10, 2009 at 02:20, wilbert said...
It was great Franin. Unfortunately the problem wasn`t the code, but I needed to do a complete hard reset. Happily now everything is working as it should be. Thanks! B.t.w.: I`ve sent you my file, maybe it can be usefull. Thankyou my friend. I actually had to update to Pronto Edit professional 2 to see yours. How good is that it looks a bit different pronto edit professional 2.
Last edited by Franin on March 10, 2009 04:37.
|
Thanks
Frank |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|