 |
 |
|
|
Philips Pronto Professional Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Interesting problem with Humax and Extender
| |
|
| Topic: | Interesting problem with Humax and Extender This thread has 9 replies. Displaying all posts. |
|
| Post 1 made on Tuesday December 30, 2008 at 17:47 |
jonstephenson Long Time Member |
Joined:
Posts: | November 2003
92 |
|
|
Using a Humax HDR Free Sat unit, and the TS9600 with a 9400 - an interesting problem. IR codes leanrs fine - tests fine (through IR of course), but will not transmit OK to the Humax - THe code is for the TV Guide, all other codes apart from Play are OK - Both of these codes work fine via IR but not via the 9400 extender.
Have tried high and low power, have moved IR eye close and far and diagonally off centre, have releart code time and time again!
Close to offerring money to someone who can help me fix this!
...Jon.
|
|
| Post 2 made on Tuesday December 30, 2008 at 17:54 |
gopronto Senior Member |
Joined:
Posts: | April 2008
1,453 |
|
|
Do youhave all the latest firmware up dates on you TSU and RFX?
|
Pronto still one of the best Wi-Fi Remotes, www.ikonavs.co.nz and [Link: axiumcontrol.com] Axium Control |
|
| Post 3 made on Tuesday December 30, 2008 at 22:17 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
Have you tried adjusting the duration on the codes?
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| OP | Post 4 made on Wednesday December 31, 2008 at 14:06 |
jonstephenson Long Time Member |
Joined:
Posts: | November 2003
92 |
|
|
Indeed, duration changed to 0.5, 1 2 and 5 - Latest firmware on both devices!
Does anyone know of a laptop based IR decoder that can read IR directed to the laptops IR port and display it
|
|
| Post 5 made on Wednesday December 31, 2008 at 14:33 |
gopronto Senior Member |
Joined:
Posts: | April 2008
1,453 |
|
|
what lenght is the IR cable from the RFX to the Humax?
I have a IR wave form capture unit fpr a laptop , but what country are you in?
|
Pronto still one of the best Wi-Fi Remotes, www.ikonavs.co.nz and [Link: axiumcontrol.com] Axium Control |
|
| OP | Post 6 made on Wednesday December 31, 2008 at 19:24 |
jonstephenson Long Time Member |
Joined:
Posts: | November 2003
92 |
|
|
The length is about 2.5 metres - And I am located in the UK
|
|
| Post 7 made on Thursday January 1, 2009 at 18:05 |
Barry Gordon Founding Member |
Joined:
Posts: | August 2001
2,157 |
|
|
I have what you need but am in the US. I built a laptop based decoder that uses a device called the Nirvis slink-e which just returns frequency and timing information on the IR stream. My software, then being told the expected protcol will analyze the timing bursts and fully decode it. It will also work with a paste of the same data in pronto HEX learned format if you want to send me the Pronto Hex data and some indication of what the actual IR protocol might be.
|
|
| Post 8 made on Thursday January 1, 2009 at 18:07 |
Barry Gordon Founding Member |
Joined:
Posts: | August 2001
2,157 |
|
|
Peter satisfy my curiosity. Just what does changing the duration of an IR code do exactly in the Pronto? Is it just changing the final off time? or does it repeat the codes for the length of the duration?
|
|
| OP | Post 9 made on Thursday January 1, 2009 at 18:22 |
jonstephenson Long Time Member |
Joined:
Posts: | November 2003
92 |
|
|
On January 1, 2009 at 18:05, Barry Gordon said...
I have what you need but am in the US. I built a laptop
based decoder that uses a device called the Nirvis slink-e
which just returns frequency and timing information on
the IR stream. My software, then being told the expected
protcol will analyze the timing bursts and fully decode
it. It will also work with a paste of the same data in
pronto HEX learned format if you want to send me the Pronto
Hex data and some indication of what the actual IR protocol
might be. Thansk Barry - can you send me your email address and I will contact you off line. [email protected]
|
|
| Post 10 made on Sunday February 22, 2009 at 13:03 |
tommeike Lurking Member |
Joined:
Posts: | February 2009
2 |
|
|
I have the same problem with my DVR-540HX. Learned codes work fine with the TSU9400 but not through the RFX9400 extender.
Latest firmware installed on both devices. No network problems. Extender works fine with AV receiver and TV, both learned codes and database codes. Have tried different durations, normal and low output level, different distances and angeles for the emitter.
Need help!
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
