Your Universal Remote Control Center
iPhone & WM Remote Apps Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Pronto code for JVC Mastercommand C-2030
This thread has 1 response. Displaying all posts.
Post 1 made on Saturday January 6, 2007 at 17:19
Lurking Member
January 2007
Got a tv here with a "limited functionality" remote, JVC Mastercommand, and what I have is channel up, ch-dwn, vol-up, vol-down, and power.

I used a PDA with omniremote to capture the codes from the remote, and that works fine; ie., I can export to notepad (looks like a long string of number, the IR code), and re-import after clearing the original data, and the codes work fine (no sampling rate problems).

Only thing is, this TV has 6 buttons on the front, with the same features I just listed (ch up/dwn, vol up/dwn, pwr and funct.), and it only seems to have auto-scanned about 4 channels, and none of them are good.

So, I need the Pronto codes for the autoscan key, and the important other keys are the zero and three, or the zero and four number keys. It would be nice to have the full set of keys for this television, but if you have a JVC Master console (24", I believe), if you could capture "0" and "3" for me in Pronto, I would appreciate it, because then I could use the tv.

I have researched this matter for several weeks before asking; I've checked the internet, and I've also checked the codes here, and the codes under "/cgi-bin/jvc" where there is a "Mastercommand" TV listed, but those codes don't work for me.

To match your database, here is part of the header that I captured, for the power key for my tv:

0000 0069 0034 0000 014F 009B 0019 003C 0019 0037

I've check some programs, read FAQs, including the general FAQ on IR codes (how they are put together), and I'm kind of feeling like Whiley-Coyote with that annoyed look on his face at the end of the cartoon, trying all these different things. I've used Tonto (nice name) and a few other programs to fiddle around with these codes, but the codes for this remote are too long.

Yes, I've heard that you can optimize the codes (compress the captured strings), but that doesn't really help unless you have the right string to begin with, and besides, it would only be helpful to recognize similar codes, but the header shouldn't change too much anyway.

Anyway, I would appreciate the pronto codes for 0 and 3 for the JVC C-2030 if you could please. Thanks in advance.
Post 2 made on Thursday June 7, 2007 at 22:36
Lurking Member
June 2007
I have the same tv, but I don't have a Remote Control.
I found the ir hex codes at
and I tried a Palm with omniremote to recreate the codes, but I couldn't do it.
Please can you export the data base from your PDA and send it to me?
Thanks in advance!
negraru at gmail dot com

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse