 |
 |
|
|
Crestron Control Systems Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Crestron Lighting (Infinet) + Control4?
| |
|
| Topic: | Crestron Lighting (Infinet) + Control4? This thread has 3 replies. Displaying all posts. |
|
| Post 1 made on Saturday July 19, 2014 at 19:30 |
weddellkw Long Time Member |
Joined:
Posts: | January 2013
186 |
|
|
I've been asked to build a basic lighting program in D3 for ~45 Crestron CLW-DIMS1RF units (tied to 2x MNETGW & a MC2E), ~15 scenes (presets), and the vacation scheduler, to be exported via RSD into the Extra Vegetables Control4 driver.
The requirements seem fairly straight-forward, but I'm concerned about the implementation/troubleshooting and future support (we're not Control4 dealers, this is a favor/friend situation.) I'm curious if anyone has worked with the driver and had a good/bad experience, etc.
Current plan is to bill for time to configure in D3, load program/firmware updates, and test Crestron equipment/program as a block...all time spent working with the Control4 programmer/equipment will be time/materials.
I'm asking because I don't want to burn the customer, and if the integration of the two systems is going to be a PITA for him, myself, or the C4 guy, I'll recommend we not move forward. -Thanks.
|
|
| Post 2 made on Wednesday December 3, 2014 at 21:29 |
brucewayne Advanced Member |
Joined:
Posts: | March 2006
895 |
|
|
I know what you are tring to do works because we had a client that had crestron lighting programed in d3 being controlled by c4. How long it takes to do I'm not sure but the final product was pretty stable.
|
brucewayne |
|
| Post 3 made on Monday January 5, 2015 at 23:16 |
twmoonly Long Time Member |
Joined:
Posts: | October 2010
197 |
|
|
We have it in our showroom. Only works on 2 series processors if you want 2way communication.
|
|
| Post 4 made on Thursday August 27, 2015 at 17:01 |
smartspacesgroup Lurking Member |
Joined:
Posts: | August 2015
1 |
|
|
Does the Crestron RSD file need to have the IP address of the Control4 Processor IP
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
