Post 1 made on Saturday July 19, 2014 at 19:30 |
weddellkw Long Time Member |
Joined: Posts: | January 2013 186 |
|
|
I've been asked to build a basic lighting program in D3 for ~45 Crestron CLW-DIMS1RF units (tied to 2x MNETGW & a MC2E), ~15 scenes (presets), and the vacation scheduler, to be exported via RSD into the Extra Vegetables Control4 driver.
The requirements seem fairly straight-forward, but I'm concerned about the implementation/troubleshooting and future support (we're not Control4 dealers, this is a favor/friend situation.) I'm curious if anyone has worked with the driver and had a good/bad experience, etc.
Current plan is to bill for time to configure in D3, load program/firmware updates, and test Crestron equipment/program as a block...all time spent working with the Control4 programmer/equipment will be time/materials.
I'm asking because I don't want to burn the customer, and if the integration of the two systems is going to be a PITA for him, myself, or the C4 guy, I'll recommend we not move forward. -Thanks.
|
|
|