 |
 |
|
|
Crestron Control Systems Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
will prodigy pamp fit on 2u shelf?
| |
|
| Topic: | will prodigy pamp fit on 2u shelf? This thread has 7 replies. Displaying all posts. |
|
| Post 1 made on Monday March 28, 2011 at 02:54 |
edizzle Loyal Member |
Joined:
Posts: | March 2005
5,916 |
|
|
it shows 3.6" H. i s it really .1"to tall for 2U? i searched for RSH, didnt find it. anyone use one?
|
I love supporting product that supports me! |
|
| Post 2 made on Monday March 28, 2011 at 07:07 |
lites4u Active Member |
Joined:
Posts: | August 2006
745 |
|
|
I have used several. Never been put in a rack. They have been put in custom cabinets. They look like they will fit on a 2U shelf.
|
|
| Post 3 made on Monday March 28, 2011 at 07:30 |
mrtristan Select Member |
Joined:
Posts: | October 2003
1,634 |
|
|
I had to partially cut the sides of a 2U shelf because the fan and intake are at the sides of the amp.
|
|
| Post 4 made on Wednesday March 30, 2011 at 00:31 |
Audiophiliac Super Member |
Joined:
Posts: | August 2006
3,312 |
|
|
RSH? Can you not simply order a rackmount kit from Crestron?
Maybe you cannot, I do not know. Just a question. :)
|
"When I eat, it is the food that is scared." - Ron Swanson |
|
| Post 5 made on Wednesday March 30, 2011 at 00:49 |
fixitnick Active Member |
Joined:
Posts: | November 2010
710 |
|
|
If you are using a custom rack shelf, it WILL be 3U. If you are trying to do something yourself, you might be able to get away with 2U if you vent the shelf sides (like mrtristan said) and have a clearance above.
Something like a blank shelf, wire management shelf or patch panel directly above the Prodigy. Even then, you will have to back set the Prodoigy on the shelf a little.
Best to allocate 3U for the amp. Besides, you don't want to cramp it the rack so that it gets too hot.
|
I keep pointing my remote at the turntable but, it never advances to the next track. |
|
| OP | Post 6 made on Wednesday March 30, 2011 at 01:23 |
edizzle Loyal Member |
Joined:
Posts: | March 2005
5,916 |
|
|
yes, i found the rsh shelf. not sure why it didnt pull up during first search. also there are several different shelves both 2u and 3u that do not have solid sides to interfere with airflow.
|
I love supporting product that supports me! |
|
| Post 7 made on Wednesday March 30, 2011 at 12:10 |
lites4u Active Member |
Joined:
Posts: | August 2006
745 |
|
|
RSH4A3R CRESTRON PAMP4X100 From Middle Atlantic. It is 3SP
|
|
| Post 8 made on Sunday April 3, 2011 at 21:26 |
cowboy007 Long Time Member |
Joined:
Posts: | August 2007
33 |
|
|
PAMP fits fine on 2U shelf if you put a blank or vent above it. I typically put a vent above them in my rack layouts. Only issue here is that the PAMP will not come out of the front of the rack. Can only put it in or take it out from the rear of the rack. I don't really see this as an issue however.
Last edited by cowboy007 on April 4, 2011 12:11.
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
