|
|
|
The following page was printed from RemoteCentral.com:
Topic: | URC's IR database very limited? This thread has 31 replies. Displaying posts 16 through 30. |
|
Post 16 made on Wednesday April 25, 2007 at 17:45 |
On April 24, 2007 at 11:28, Jeff Wagner said...
I asked around for an answer (I don't use a remote on my XBOX360). The 360 doesn't have discrete codes for ON or OFF, just a toggle POWER. We can't add that which doesn't exist!
Jeff I am pretty sure there is discrete power for the 360. I definitely had it working on a Pronto file, and I taught it into a customer's 950. Let me know if you'd like to try the codes.
|
|
Post 17 made on Thursday April 26, 2007 at 12:00 |
Jeff Wagner Founding Member |
Joined: Posts: | January 2002 368 |
|
|
On April 25, 2007 at 17:45, marsht said...
I am pretty sure there is discrete power for the 360. I definitely had it working on a Pronto file, and I taught it into a customer's 950. Let me know if you'd like to try the codes. I'd love to try them, if you can send me a file ( [email protected]). Thanks, Jeff
|
|
Post 18 made on Friday April 27, 2007 at 03:22 |
Jottle Long Time Member |
Joined: Posts: | November 2006 96 |
|
|
On April 25, 2007 at 17:45, marsht said...
I am pretty sure there is discrete power for the 360. I definitely had it working on a Pronto file, and I taught it into a customer's 950. Let me know if you'd like to try the codes. I'd be grateful to see the discrete xbox360 power codes as well. Can email you about them? There's no PM on this forum.
|
|
Post 19 made on Friday April 27, 2007 at 03:25 |
Jottle Long Time Member |
Joined: Posts: | November 2006 96 |
|
|
On April 24, 2007 at 11:28, Jeff Wagner said...
I asked around for an answer (I don't use a remote on my XBOX360). The 360 doesn't have discrete codes for ON or OFF, just a toggle POWER. We can't add that which doesn't exist!
Jeff Jeff, Thanks for looking. Please reply back if the pronto file works on an mx-850. It'd be wonderful to have discrete codes!
|
|
Post 20 made on Friday April 27, 2007 at 11:27 |
Jeff Wagner Founding Member |
Joined: Posts: | January 2002 368 |
|
|
Still waiting for the file...
Jeff
|
|
Post 21 made on Friday April 27, 2007 at 17:00 |
flandon Advanced Member |
Joined: Posts: | September 2004 805 |
|
|
I want Codes too. Pleeease. [email protected]Thanks,
|
Flandon the mighty Dragon Fisher |
|
Post 22 made on Friday April 27, 2007 at 21:10 |
Sorry it took a little while to get this to you, but some people have to actually program these things for customers during the week ;).
|
|
Post 23 made on Tuesday May 1, 2007 at 23:14 |
Jottle Long Time Member |
Joined: Posts: | November 2006 96 |
|
|
On April 27, 2007 at 21:10, marsht said...
Sorry it took a little while to get this to you, but some people have to actually program these things for customers during the week ;). Any updates?
|
|
Post 24 made on Wednesday May 2, 2007 at 18:21 |
On May 1, 2007 at 23:14, Jottle said...
Any updates? Jottle- I sent you a 900 file earlier on Friday, then an 850 file later that evening. I was waiting to hear from you on whether it worked for you or not. I also sent the codes to flandon and Jeff Wagner. Still waiting to hear about those codes, guys.
|
|
Post 25 made on Thursday May 3, 2007 at 17:11 |
On March 27, 2007 at 10:49, Jeff Wagner said...
Please keep in mind that we cannot list every single device by every single manufacturer - if we did it would take hours to do a live update and you'd need many gigabytes of space just to store it on your computer. That being said, we do add new models on a regular basis, but this only happens if the new model uses a different code set than a previous model. In addition, if you are dealing with a brand that you are not familiar with and you don't see a model number that is close you can always use the generic code set at the end of the list. You'll see something like Sony1, Sony2, Sony3...Sony15 with the highest number reflecting the most recent code set and number one being the oldest.
Hope that helps,
Jeff hi jeff love the rx3000 ... best remote i've used by far. i'm trying to interface to my new ATT Uverse System. the box is model VIP1216 made by Motorola. i've tried all the generic code sets (under cable) ... none work. do you happen to know which set might work best? thanks al
|
|
Post 26 made on Saturday May 5, 2007 at 01:55 |
Jottle Long Time Member |
Joined: Posts: | November 2006 96 |
|
|
On May 2, 2007 at 18:21, marsht said...
Jottle- I sent you a 900 file earlier on Friday, then an 850 file later that evening. I was waiting to hear from you on whether it worked for you or not. I also sent the codes to flandon and Jeff Wagner.
Still waiting to hear about those codes, guys. still testing
Last edited by Jottle
on May 5, 2007 02:41.
|
|
Post 27 made on Saturday May 5, 2007 at 03:17 |
CCD Super Member |
Joined: Posts: | August 2005 2,731 |
|
|
I would suggest putting as few hours on your 360 as possible! The XBOX button always turns it on so I just put the XBOX button in my Watch XBOX macro string and then I ALWAYS hit the power button when done. This puppy sounds like a 747 taking off when it is running and the fewer hours you put on it the longer it will be before the evil red ring of death visits your console. Anyone using an XBOX should be savvy enough to not require discretes.
|
|
|
Post 28 made on Saturday May 5, 2007 at 20:23 |
Jottle Long Time Member |
Joined: Posts: | November 2006 96 |
|
|
Thanks for the wonderful advice CCD.
|
|
Post 29 made on Sunday May 6, 2007 at 09:03 |
John.Robbins Long Time Member |
Joined: Posts: | April 2007 17 |
|
|
On May 2, 2007 at 18:21, marsht said...
Jottle- I sent you a 900 file earlier on Friday, then an 850 file later that evening. I was waiting to hear from you on whether it worked for you or not. I also sent the codes to flandon and Jeff Wagner.
Still waiting to hear about those codes, guys. Any luck with the 360 codes? Could you send me the file too? I'd like to try.
|
John |
|
Post 30 made on Sunday May 6, 2007 at 17:50 |
CCD Super Member |
Joined: Posts: | August 2005 2,731 |
|
|
On May 2, 2007 at 18:21, marsht said...
Jottle- I sent you a 900 file earlier on Friday, then an 850 file later that evening. I was waiting to hear from you on whether it worked for you or not. I also sent the codes to flandon and Jeff Wagner.
Still waiting to hear about those codes, guys. Hey Marsht, I would like to play with those codes. Any format is fine I am a URC AD and have all the editors. Even though I follow my advice from above I still would benefit from the codes. Maybe I can pay you back sometime with the 10gb of files we have created in the last 5 years. My email should be easy to find.
|
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|