Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
logitech ps3 adapter with CCP
This thread has 5 replies. Displaying all posts.
Post 1 made on Thursday July 5, 2012 at 20:47
rumnyc
Long Time Member
Joined:
Posts:
May 2012
34
How do I program PS3 off with CCP (using MX-1200)?

I need to simulate a PS hold for 2 sec then select select. but i cant figure out how to simulate a hold. do i need to set the minimum repeat to a very high number like 2000? Is there a another way?
Post 2 made on Friday July 6, 2012 at 11:12
kgossen
Super Member
Joined:
Posts:
March 2008
3,022
Try Here
"Quality isn't expensive, it's Priceless!"
OP | Post 3 made on Saturday July 7, 2012 at 07:38
rumnyc
Long Time Member
Joined:
Posts:
May 2012
34
On July 6, 2012 at 11:12, kgossen said...
Try Here

Sorry, I already have the logitech ps3 adapter because I had harmony remote before. Anyway to use it with URC CCP?
Post 4 made on Saturday July 7, 2012 at 10:27
kgossen
Super Member
Joined:
Posts:
March 2008
3,022
I don't know of a way in CCP to sustain the signal for the time you need without holding the button for that time. You could try increasing repeats and see if that would work but the maximum repeat setting is 255 so don't know if that would be enough. I assume the 1200 has the "sending" indicator on the screen (usually upper right corner). Change the repeats to 255, send the command and see how long the indicator stays lit up. Divide that into the 2 seconds and repeat that many times one after the other, add your select, select and see if that works.

CCP leaves a LOT to be desired when it comes to programming.

Last edited by kgossen on July 7, 2012 10:41.
"Quality isn't expensive, it's Priceless!"
Post 5 made on Sunday July 15, 2012 at 17:22
dereckr
Lurking Member
Joined:
Posts:
July 2012
7
I went down this road the harmony adapter only works with there remote. I am currently using the Schmartz one mine works like a charm and it's cheap. CCP already has it programmed in.

[Link: schmartz.com]
Post 6 made on Monday July 16, 2012 at 18:56
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,684
Logitech did not build a Power Off macro into their adapter (like all the others did), and they simulate holding the key directly on the end-user remote.

Really, there's no reason to use the Harmony adapter unless you also have a Harmony remote (and even then, only because of brand loyalty).


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse