Post 1 made on Saturday April 3, 2010 at 10:49 |
helgi Long Time Member |
Joined: Posts: | October 2004 12 |
|
|
Hi guys,
I would like to control an aplaince with rs232 connection from two different controllers (for example a Pronto remote and a KNX system).
I've got a good tech tip from the Pronto guys but it only works for sending commands, not for feedback. I've also found a rs323 portsplitter, where you can connect two devices that can talk two-way to one device. But you need a trigger signal to open the com-port and a Philips rfx9600 can't do that.
Does somebody has any experiance with this?
Best Regards,
Helgi
|
|
|