Post 1 made on Monday November 16, 2009 at 13:50 |
gx270 Long Time Member |
Joined: Posts: | September 2005 194 |
|
|
So, I'm using an RTI T2CS, RP6, and Shinybow SB5644. I used the rs-232 commands from the library and plugged the cm-232 module into port 1 of the rp6.
It tested fine, but now that I have it installed at the clients house, it won't take an rs-232 commands.
I can change outputs via the front panel or ir but not rs-232.
Any thoughts?
Thanks.
|
|
|