I took the cover off where the connector wires went and it's basically got wires coming into it from the power and ex-line connector and the setup button. Going out are the wires going to the three motors (left/right,tilt up/tilt down, and extend out/extend in). There is also a blank connector of 6 pins (2 rows of 3) that I assume this is a service connection that engineers/repairmen can test the unit without hooking it up with a Samsung TV. There's probably nobody outside of Korea that could tell me what signals these pins need to control the unit. But if anybody reads this and knows more that I do, any help would be appreciated. If I could get buttons hooked up that would program the memory locations, select the one I want to use and return it to home position that would be all I would need. I don't think I will ever be able to operate it with any kind of remote. Thanks for listening, Phil