Hi Xetick,

Thank you for your nice program, Prontronic.
However it won't work, I think I am doing something very wrong...

In your 'how to use' text, point 3: "Set the ip address to the computer you are going to run the prontonic program on....."
Normally I have a DHCP setting but changed the ip adress (just to try) to a unique adress 192.168.1.201 subnetmask 255.255.255.0 and the gateway to the router ip adress 192.168.1.1.
I followed your points 4,5,6 and 7 and added a button with an RS232 command on a page...
In the wireless setting I set my computer ip address, gateway, SSID, WEP password etc.
I downloaded the program to my TSU9600.
When I start up your program and press the button, the "connecting" message changes a short time into a "command failed" message.
The real RFX9600 extender is still connected to my network(?)
The screen of your program does not change when pressing the button, no list of packets...
Do I have to set the tools - options Proxy settings of your program?

What am I doing wrong?

Mike