On January 7, 2009 at 13:17, joshg said...
I'm a new MX-880 user and have been reading all I can
to make the most of it. I've read this whole post, including
dsp81's small addendum about the 880 in his original post.
I'm still confused - can I create the nice 6-button sets
for my "watch" pages like those for my Tivo and Cable
Box as shown in the original post or can you only do those
with an 810? The directions refer to the ProWizard and
the "Activities" sections which don't apply to the 880.
Appreciate any guidance on doing these great tricks for
the 880.
(Would really be great if someone could create a post
just like the first one with step-by-step directions for
880 owners.)
Thanks all,
-josh
The file type and dimensional requirements are the same between the two remotes - 88x59 transparent PNG.
The files are located in the same place:
C:\Program Files\Universal Remote Control, Inc\MX-880 Editor\images\stationLogo
Simply place your images in one of the subfolders. I usually use the "Local" folder. To add your images, select Program > 3 Edit Buttons (also on the toolbar). Click on the button position and click the Select button in the lower right-hand corner. Locate the desired image and apply. Repeat as needed. Click save when you are done.
Expand Favs in the left-hand column. Click on Page 1. Click the button next to the image you want to program. Add the commands like you would with a normal macro. Rinse and repeat.
The addendum was just to point out that you can only add images to the Favs pages and no where else on the remote.
