Post 10 made on Wednesday January 2, 2008 at 20:25 |
TWilly Founding Member |
Joined: Posts: | March 2002 17 |
|
|
Mark,
It is my understanding that the Nevo Connect configurations should show the following:
1. Red if the device is being controlled by a specific IR port 2. Gray if the IR port is still available for control of other devices, OR if the device is being controlled by the IR blaster 3. Half red, half green if the Port is being used to connect to a Nevo Serial connector 4. Grayed out (dim gray) if the port is being used by a derial connector to control a DIFFERENT piece of equipment, and is therefore unavailable to be used to control anything else
I called UEI tech support, and they are RMAing the antenna for now. We'll see if that changes anything.
Tom
Tom
|
|
|