Your Universal Remote Control Center
Philips Pronto NG Family Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 19 made on Sunday October 8, 2006 at 12:59
Eigeny Oulianov
Founding Member
October 2001
Sorry, I may not so clear in talking.

Commands like 0000 007D 0000 00A4 00A8 0047 000C 003B ... are for Daikin. Old Prontos may learn and replay them, but NG can't learn and import. Now I make a convertor for this purpose (I hope, NG _will_ play my synthetic codes)

There are _many_ commands for Daikin -
3 modes (Auto, Cool, Dry) x 15 temperatures (18C-32C) x 4 fan modes (low, med, hi, auto) = 180 commands, plus OFF, wet and powerful modes (ignoring Swing, timers etc).
I cut odd temperatures and use the rest 96 command at Crestron installations. Currently I prefer to control Daikin via LON-RS232 interface - it contains 2-way interface at this solution.

Commands like 0000 006F 010A 0000 0080 0040 ... (or erratically learned (?) 0000 006F 00C3 0001 0081 0041 0010 0031 ...) are for Panasonic air conditioners (at least, I have touched them at Panasonic). These commands are too hard either for Pronto, NG or for Crestron. May be, Panasonic make some OEM for Daikin?

Hosting Services by ipHouse