Your Universal Remote Control Center
RemoteCentral.com
Harmony Remote Controls Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 52 made on Thursday March 6, 2008 at 07:36
alanparrott
Long Time Member
Joined:
Posts:
August 2002
52
On March 5, 2008 at 19:29, jlet said...
...| My guess is you are having a cold start problem only when
starting with the HDMI activity. ..

OK so this is weird! It happens on all activities regardless. Warm is fine flashes a few green buttons on the set but Cold I get 2 Red flashes then nothing!

I have tried this in Device mode so therefor I dont think it is the activities. I think it's looking for a slightly longer press on the button other than the power on delay which can be set.

If I hold the ONE botton for a fraction longer the set turns on, so I tried telling it that ONE was the Power ON but it was having none of it.

When the TV is Powered Off after about 50 seconds there is a Click on the TV like an on/off click which seems to send the TV to sleep. If I catch it just before the click it's fine, one second after the click its NO!

I have checked the TV settings/manual etc and can find nothing.

Thanks

Alan - EDIT see next post

Last edited by alanparrott on March 6, 2008 10:03.


Hosting Services by ipHouse