Post 56 made on Wednesday January 19, 2005 at 16:04 |
johnsfine IR Expert |
Joined: Posts: | September 2002 5,159 |
|
|
You need to pay attention to the subdevice in these signals.
For example: Device Code: 128.4 Function: 124 - Comp 1
There the device is 128 and the subdevice is 4 and the OBC is 124.
You correctly converted the OBC of 124 to an EFC of 004. But I suspect you used that with a setup code for device 128, subdevice 0, rather than subdevice 4.
If you need detailed help, ask in the JP1 forum rather than here. Basically, you can either make a dummy setup code for Panasonic:128.4 and base EFC KeyMoves on that, or you can build a new setup code for the whole device using a combo protocol that allows 128.0 and 128.4 in the same setup code.
|
|
|