On November 22, 2007 at 11:49, mattweb said...
interestingly, i was looking at this today, we've done
a few PS3s with the Nyko Bluwave IR dongle using MX-900s.
Works alright, FF is a bit off but otherwise fine. We
found we were using the dongles and getting a stockpile
of nyko remotes, decided to try against all odds with
a standard PC IR dongle - no such luck.
I'm under the impression that the IR sent is unique to
the remote and means nothing to the playstation, it's
the reciever that decodes it and then sends the right
thing down the USB...the IR is just to get the signal
over the air.
Yes, this is correct.
The PS2 codes are Sony device 20 protocol and the Nyko is NEC1 device 0.246 protocol.