Hi Tgrugett and thanks for all your help!
On December 22, 2007 at 13:04, tgrugett said...
I have tested and confirmed the input 3 commands with
sucess.
What remote did you say you are using?
I am using a Pronto RU980, so I am just copy/pasting the strings from here into the Pronto.
Try learning the command you are issuing (all three actually)
and post it here. I can look and see if there is any issue
with the code issue itself.
I'm not sure exactly what you mean by learning the commands, given that I am just copy/pasting them in. However, perhaps this will give a clue to where I am going wrong (although I think I'm just going to end up repeating your codes back to you!).
The TV powers up with Input 1 selected so, for consistency, I am going back to input 1 before each test.....
Sending this code, successfully switches to Input 2:
0000 006D 0000 0020 000A 0047 000A 001E 000A 001E 000A 001E 000A 001E 000A 0047 000A 0047 000A 001E 000A 001E 000A 0047 000A 0047 000A 001E 000A 001E 000A 0047 000A 001E 000A 0680 000A 0047 000A 001E 000A 001E 000A 001E 000A 001E 000A 001E 000A 001E 000A 0047 000A 0047 000A 001E 000A 001E 000A 0047 000A 0047 000A 001E 000A 0047 000A 0680
Then, this one switches back to Input 1:
0000 006D 0000 0020 000A 0047 000A 001E 000A 001E 000A 001E 000A 001E 000A 001E 000A 0047 000A 001E 000A 001E 000A 0047 000A 0047 000A 001E 000A 001E 000A 0047 000A 001E 000A 0680 000A 0047 000A 001E 000A 001E 000A 001E 000A 001E 000A 0047 000A 001E 000A 0047 000A 0047 000A 001E 000A 001E 000A 0047 000A 0047 000A 001E 000A 0047 000A 0680
Then, this one switches to Input 4:
0000 006D 0000 0020 000A 0047 000A 001E 000A 001E 000A 001E 000A 001E 000A 0047 000A 0047 000A 001E 000A 001E 000A 0047 000A 001E 000A 0047 000A 0047 000A 0047 000A 001E 000A 0680 000A 0047 000A 001E 000A 001E 000A 001E 000A 001E 000A 001E 000A 001E 000A 0047 000A 0047 000A 001E 000A 0047 000A 001E 000A 001E 000A 001E 000A 0047 000A 0680
Back to input 1 again (see code above), then try this one for Input 3:
0000 006D 0000 0020 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 0046 000A 0046 000A 001E 000A 001E 000A 0046 000A 001E 000A 0679 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E 000A 0046 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E 000A 0046 000A 0679
This gives an on-screen message saying "no teletext available". Back to Input 1 again, then try this one:
0000 006D 0000 0020 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 0046 000A 001E 000A 0046 000A 0046 000A 001E 000A 001E 000A 0046 000A 001E 000A 0679 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E 000A 0046 000A 0679
Just a flash of the red light on the TV and nothing else. Back to Input 1 again, then this one:
0000 006D 0000 0020 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 0046 000A 0046 000A 0046 000A 001E 000A 0046 000A 0046 000A 0046 000A 0046 000A 001E 000A 0679 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 0679
Again, nothing other than a flash of the red light.
Thanks again for your help - and all clues welcome!
