On 06/09/02 21:21.48, jwalkup said...
If the receiver has latching power, you could
use a xantach CC-12 to trigger a Niles AC-3. Then
you would have discrete power commands.
Unfortunately, the Adcom GTP-600 which is used as the whole-house audio preamp, does not have a latched power switch or discretes(to my knowledge). To make things more challenging, the unit is controlled by both the VIA! panel and a Lexicon 700TRF with a TCM-3RF which is used to control the media system and the whole-house audio.
Controlling the Adcom from the 700T is no problem, as the 700T in conjunction with the TCM-3RF, can sense the power status of the Adcom through a sync port.
The problem lies with the VIA! which is used for the whole-house system only. It controls a VIA! music, a music-only satellite receiver, and the Adcom preamp. Somehow it is understood by the client, that one touch of a source button will set the WH system for the source selected. Before anyone knew if the Adcom had discretes.
So that's where I stand, as of now. If anyone could help here, I would greatly appreciate it.
Thanks in advance,
JJP
This message was edited by John Pechulis on 06/09/02 22:24.27.