Post 1 made on Friday February 21, 2003 at 09:59 |
HowardA Founding Member |
Joined: Posts: | August 2001 13 |
|
|
Not an installer, hope this is OK. I have a Niles IRP2+ with 4 devices attached in serial to it through their built-in remote cables that stick out the rear corner of the boxes. Everything works fine.
I have tried to add one more device (my Motorola 5100 cable box) by using an IRC2 microflasher attached to the variable out port. I have adjusted the output every which way, have moved the flasher every which way and cannot get it to work.
Have I exceeded the output of the thing by adding a 5th device? Any suggestions?
Thanks
|
|
|