Post 47 made on Wednesday February 6, 2008 at 04:13 |
Nick-ISI Long Time Member |
Joined: Posts: | September 2004 490 |
|
|
All the AD5 range will respond to power on/off over RS232, but you need to enable it in the hidden service menu, and just to be difficult the procedure for screens 32" and over is different than for the smaller models.
The installer menu is made up of lots and lots of visually meaningless codes - play here at your peril!!
Ask sharp tech support for procedure to enter service mode and change the setting. They may ask you to sign a disclaimer so that if you screw with the wrong settings then they can charge you to put it right.
I do not have the procedure to hand but may be able to get it later from one of the engineers if you have no joy.
We are succesfully controlling 20", 26", 32" and 37" AD5E sets over RS232, so iI know it works
|
|
What do you mean you wanted it on the other wall - couldn't you have mentioned this when we prewired? |
|