Post 2 made on Thursday October 31, 2002 at 00:57 |
jamesgammel Founding Member |
Joined: Posts: | March 2002 1,152 |
|
|
b, The power toggle is "250". the discrete on advance code is "248", the discrete off advance code is "246". Use the keymove feature or procedure to add it. If you want to use the discretes, you'll need to program one to each of 2 buttons. The toggle would just have to be programmed to one button, may as well use the power button. You could, perhaps, program the discrete on to "power", and the discrete off to "shift-power". If you don't know how to input advance codes, check the manual at rob's site for your remote. Would have helped if you mentioned what remote that was, and I could have given the appropriate explicit instructions. "176" would be appropriate for the P-8 (Producer 8) series as they use 3 digit device setup codes. Most other's use 4 digit device setup codes, so the 0 is significant, and the setup code is actually 0716. Advance codes are 3 digit codes, and zeros are also significant. Jim
|
|
|