On 11/07/02 09:42.48, jamesgammel said...
within device setup codes, the advance codes are
the same, regardless of which ueic remote you
are using. I.e., If you use (for example) efc
180 with TV_0250 in your 1994, that same efc will
do the same function with TV_0250 in a 2116, 8090,
etc.
My TV used to use code 0158 but that is not listed in the 2116 manual. I seem to have to use 1058 now. This doesn't seem to be a huge deal. My VCR that I used to move keys for on screen display etc... don't seem to be working now. I put them on the new key equivalents. Weird. I thought the advance codes might have been re-assigned hence my post 8o)
So you are saying that my 114 advance code should still work. Weird it doesn’t seem to. I will have to play more.
As you no doubt noted, several buttons were
reshuffled compared to where they were located
on either the 1995 or 1994, so they will end up
in different locations on your 2116. That may
take a little time to get used to if you've gotten
real accustommed to the know-and-feel of your
1994.
Yes this is weird but understandable. I accounted for this.
Does anyone know what the db-08 to db-14 device buttons are in IR?
Also the other settings options?
There may well be a built-in sony tivo code,
I would think your manual would list it.
Doesn’t seem to be.
If format follows thru with this new remote,
the manual may list many of the codes pre-programmed
in, but experience with the latest offerings demonstrates
that a good few of the older codes may not be
mentioned in the manual, but are indeed in the
library; If you used a pre-programmed code with
your 1994, and it worked well with your device,
it won't hurt to see if the 2116 will accept it,
even if it's not specifically mentioned in the
manual, you may well get lucky.
Everything worked on the 1994. I am doing a fresh 2116 setup with IR, basically using the same key moves and macros, adjusting for net key locations. Some stuff seems to work well and others just don’t seem to work.
Thanks Jim!
