On May 17, 2006 at 17:59, irs009 said...
I did select the NEC1 protocol and device=96 and
sub device=157 in KM.
I misunderstood your description earlier. I thought you hadn't put device and subdevice into KM.
If you did all that you now describe, your upgrade should be as accurate as your list of EFC numbers.
I'll try going directly to IR
with Robman's code.
I though Rob based his on the EFC list you posted, so it wouldn't be any better.
On May 17, 2006 at 15:43, irs009 said...
The volume
and mute don't work as well as the functions I
entered for menu, guide, info, and exit.
How should I read the above phrase? Volume and Mute don't work at all and those others also don't? Volume and Mute work, but not as well as other functions work?
Assuming Vol and Mute don't work at all, have you tried clearing volume lock so you're sure you're using the vol functions from your upgrade?
While you have a Vol key pressed, look at the LCD. I think it changes from displaying the setup code of the selected device mode to displaying the setup code of the signal being transmitted. If there is volume lock or a KeyMove overriding the upgrade, then the displayed setup code should change while the key is pressed.
Also, do you have any learned signals present that may be overriding the signals in the upgrade?
Last edited by johnsfine
on May 17, 2006 18:14.
