I'm having a bit of trouble with an IRF6 and a Nakamichi SoundSpace 10. The rf data light and emitter indicator leds stay lit (at a low flashing level) after a button has been pressed on the T2. If I shut the power down on the Nak the rest of the gear works fine and the rf data and ir indicator lights go out after the button is pressed. I am assuming the Nak is generating a good amount of RFI. Has anyone else put these two together? Has anyone ovecome an RFI problem, if so, how? BTW, I do not believe its related to antenna placement, I moved the antenna to the full length of the cable away from the Nak, still had the problem.

jcmitch