| Post 2 made on Monday June 25, 2007 at 17:34 |
The Robman Loyal Member |
Joined:
Posts: | August 2001
6,218 |
|
|
Your best bet would be to get a "One For All" learning remote and a JP1 cable. You would then use these to capture and decode the signals sent by the Beko remote. You would then use this captured info to create an upgrade for the OFA remote that would work the Beko. Then finally, you could test any unused "OBC" codes to see if you can find the service code.
| |
|
|
|
