Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 4 made on Monday April 11, 2022 at 19:05
audvid
Founding Member
Joined:
Posts:
August 2001
114
On April 11, 2022 at 14:11, Fred Harding said...
your emitters are capable of sending the signal from 20 to 100 , so that's not the issue.

If the emitter is not properly positioned, or the wiring is damaged, that could be the issue. You say you know the emitter is good. One easy test is to unplug all emitters from the connecting block except for the one you want to test, and point a remote at the target and press a button. If a talk back light occurs, the emitter is good.

I know that the emitter is good because:
1. It has a red led light, which lights up with IR signal.
2. I put in a new emitter.
3. I have several emitters which are working just fine.
4. I have a IR blaster for the whole equpment and I put the IR receiver of the shield in its range (8 ft) and it still doesn't work.

Do connecting blocks have limitations? Mine is about 20 years old xantech 791-44.
My IR receiver is Xantech ML95.


Hosting Services by ipHouse