We looked at a clients fireplace today. It had 2 low voltage wires connected to a switch. In the on position the switch turned on the fireplace. In the off position it turned it off. It seems like the switch is opening and closing the connection. We want to use a control4 switch to do the same thing. We have power in the box. Would we be able to hot up the switch and connect it to a relay and also connect the fireplace wires to the relay so that when the power is on, it energizes the relay and turns on the fireplace, and same for off? I've never tried it, but in theory it should work, I just want to see if anyone has done this before. If so, what relay would you use, and where can we get it? Thanks a lot.